What exhaust tips?

C

chuckmiester

Member
 A yorks
Does any body have any suggestions for a set of nice exhaust tips. Been looking round and the genuine ones are a stupid price for what they are. :o
 
These are half price on Amazon and lots of members have jumped in:

https://www.amazon.co.uk/Top-Longer-Stainless-Steel-Exhaust-Polished/dp/B017XLG2H8/ref=sr_1_1?ie=UTF8&qid=1527840385&sr=8-1&keywords=top+longer+exhaust+tips&tag=z4fo-21

https://z4-forum.com/forum/viewtopic.php?f=2&t=106653&hilit=exhaust+tips

I'm really pleased with them

tips.JPG
 
Just measured the exhaust on the car and they are nearly 70mm diameter and a slightly square shape. It looks like these tips are only around 65mm. Are they the right ones?
 
My 3.0si has a standard sized twin exhaust and these tips fit perfectly. Yours are slightly square you say - sounds non-standard?

Twin 3.0
twin.jpg

Single 2.0
single.jpg
 
I would say it has the standard back box. The father in law has owned the car for the past 10 years and never altered anything. Il measure them again tonight.
 
These are available in polished Stainless -
https://www.ebay.co.uk/itm/Exhaust-Tail-pipe-Trim-Tip-Stainless-Steel-for-VW-Golf-VI-VII-Scirocco-2008-2014/263111519776?hash=item3d42ab2e20:g:WmkAAOSwhilacX17:rk:1:pf:1

https://www.ebay.co.uk/itm/2-Silver-Stainless-Steel-Exhaust-Tail-pipe-Trim-Tip-for-VW-Scirocco-Golf-VI-VII/323408461329?fits=Model%3AGolf&epid=15022931489&hash=item4b4ca57e11:g:JsEAAOSwAWlaeBrF


These are the 68mm / 70mm tips for a Golf / Scirroco

£16 for a pair - fit the 3.0si perfectly
 

Attachments

  • Tip1.jpg
    Tip1.jpg
    18.9 KB · Views: 1,029
  • Tip 2.jpg
    Tip 2.jpg
    19.8 KB · Views: 1,029
Marlon said:
These are half price on Amazon and lots of members have jumped in:

https://www.amazon.co.uk/Top-Longer-Stainless-Steel-Exhaust-Polished/dp/B017XLG2H8/ref=sr_1_1?ie=UTF8&qid=1527840385&sr=8-1&keywords=top+longer+exhaust+tips&tag=z4fo-21

https://z4-forum.com/forum/viewtopic.php?f=2&t=106653&hilit=exhaust+tips

I'm really pleased with them

tips.JPG
Click to expand...

Just ordered some, thanks for this :D
 
Marlon said:
My 3.0si has a standard sized twin exhaust and these tips fit perfectly. Yours are slightly square you say - sounds non-standard?

Twin 3.0
twin.jpg

Single 2.0
single.jpg
Click to expand...

I think the OP will have a pre facelift, there were slightly squared in shape from memory.
 
I have machine monkey (a member on here) trims on my Z4 and they clean up really easily. Also look pretty nice too :thumbsup:

_20190127_162710.JPG

_20190127_162730.JPG
 
I bought this pair from a seller on eBay £14.99...

www.ebay.co.uk/itm/162491591603


zz2.jpg
zz1.jpg

Quality is good (not great - but good enough). Fitted in seconds. A lot less trouble than cleaning up the old ones, plus I rather like the slash cut ends.
 
Pretty sure OP has the same as me (pre FL) which have slightly oval shaped tips.

Nothing will fit properly unfortunately. I ended up polishing mine which looked great tho I wish they were a bit bigger to fill the bumper gap!
 
tomrdy said:
Pretty sure OP has the same as me (pre FL) which have slightly oval shaped tips.

Nothing will fit properly unfortunately. I ended up polishing mine which looked great tho I wish they were a bit bigger to fill the bumper gap!
Click to expand...
you’re right they are a slightly oval shape. I got some from amazon for an Audi A4. I think they are 72mm. They don’t fit perfect but aren’t too bad. They do need a self taper to hold them on though.👍🏻
 

Attachments

  • A8E219BA-FE6A-4ED9-8D0F-6B479240CB70.png
    A8E219BA-FE6A-4ED9-8D0F-6B479240CB70.png
    1.1 MB · Views: 887
Dave 2 dogs said:
Chuckmiester
Wack my eisenmann exhaust box on the back :thumbsup:
You won’t stop smiling :driving:
Click to expand...
these cars do need a louder exhaust.
I thought when I got the car, when the back box starts to show a bit of age it will be a good excuse to put a better sounding box on it. The damn thing still looks like new☹️. I had a gundo hack done on the porker which is basically a pair of 3/4 pipes that bypass both back boxes. I’m sure I read on here when I was a member about 6 years ago that this could be done on the zed but can’t seem to find anything about it. The sound is awesome, plenty of crackling on over run and no drone. 👍🏻
 
longshaw said:
Marlon said:
Single 2.0
file.jpg
Click to expand...


Sorry revive an old post, but 2.0 single - Where can I find stainless tail pipe? (mine has fallen off/do they even come as standard?)

I've ordered one of these and keeping my fingers crossed
https://www.amazon.co.uk/dp/B002J2LUEW/ref=cm_sw_em_r_mt_dp_U_Y7e7CbNKASS3J
Click to expand...

Hi
I bought one of these. https://www.ebay.co.uk/itm/171851200478?ul_ref=http%253A%252F%252Frover.ebay.com%252Frover%252F1%252F710-53481-19255-0%252F1%253Ftype%253D2%2526pub%253D5575403537%2526toolid%253D10001%2526campid%253D5338343596%2526item%253D171851200478%2526customid%253Dvms%25253Aeb%25253Ap%25253A171851200478%25253BEAIaIQobChMImNqqpdy94gIVB5zVCh3RrgipEAUYAiABEgIN0fD_BwE%2526gclid%253DEAIaIQobChMImNqqpdy94gIVB5zVCh3RrgipEAUYAiABEgIN0fD_BwE%2526srcrot%253D710-53481-19255-0%2526rvr_id%253D1987086761193%2526rvr_ts%253Dfd628e5416a0ab13362403c0fffba02f&ul_noapp=true
 
You must log in or register to reply here.
Back
Top Bottom