Wanted Pre facelft rear bumper

H

hopz121

Veteran
 Guildford Surrey
Hi all looking for a Pre Facelfit rear bumper,

Ideally in Black Sapphire and not neededing paint

Thanks

Ash
 
Fair few on Ebay at the min, some with PDC holes if needed others without if needed.
http://www.ebay.co.uk/itm/BMW-Z4-E85-genuine-pre-facelift-rear-bumper-cover-Black-/141795829836?fits=Model%3AZ4&hash=item2103b0a84c:g:AzMAAOSwKsRWFj1F

http://www.ebay.co.uk/itm/BMW-Z4-E85-REAR-BUMPER-51127016068-7016068-/262091917023?hash=item3d05e546df:g:jgwAAOSw9mFWHOKJ
http://www.ebay.co.uk/itm/BMW-E85-E86-Z4-REAR-BUMPER-BLACK-GENUINE-A3129-/321900140011?hash=item4af2be55eb:g:2YIAAOxyItRTeeMm
http://www.ebay.co.uk/itm/BMW-Z4-2003-2006-BUMPER-REAR-/141793907376?fits=Model%3AZ4&hash=item21039352b0:g:zV4AAOSwNNxWE43a
http://www.ebay.co.uk/itm/BMW-Z4-PRE-FACELIFT-E85-REAR-BUMPER-GENUINE-BMW-PART-O8-/131506530304?hash=item1e9e666800:m:m4hSokU8lyjuhWOB430fwhw
 
Thanks mate, I have seen all of those before though :(

Only one is in good condition and it doesn't have PDC holes which i require, i have been following the ebay search for a few months now but nothing has popped up yet, was hoping for a fourm member to have swapped one for an M bumper or something and had a spare one.

Mine is damaged and i was hoping to replace the bumper rather than repair the one i have.
 
Are the holes not marked for drilling as the headlight washers are on the front? Might be worth doing to the good one without PDC?
 
paddy wright said:
Are the holes not marked for drilling as the headlight washers are on the front? Might be worth doing to the good one without PDC?
Click to expand...

I think you're right - have heard this too
 
Moheddine said:
paddy wright said:
Are the holes not marked for drilling as the headlight washers are on the front? Might be worth doing to the good one without PDC?
Click to expand...

I think you're right - have heard this too
Click to expand...

I didn't think that it was just a case of drilling holes, They clip into holder on the back of the bumper (at the back of the hole)

On this M Bumper you can see the rear of it and the mounts that the sensors clip into, I don't think the non PDC bumper comes with the mounts fitted. (I maybe wrong but thats what i currently understand)

http://www.ebay.co.uk/itm/BMW-Z4-E85-E86-M-SPORT-M-POWER-REAR-BUMPER-IN-SILVER-B318-/271998775891?fits=Model%3AZ4&hash=item3f5463f253:g:iWoAAOSweW5VP~dg
 
paddy wright said:
Fair few on Ebay at the min, some with PDC holes if needed others without if needed.
http://www.ebay.co.uk/itm/BMW-Z4-E85-genuine-pre-facelift-rear-bumper-cover-Black-/141795829836?fits=Model%3AZ4&hash=item2103b0a84c:g:AzMAAOSwKsRWFj1F

http://www.ebay.co.uk/itm/BMW-Z4-E85-REAR-BUMPER-51127016068-7016068-/262091917023?hash=item3d05e546df:g:jgwAAOSw9mFWHOKJ
http://www.ebay.co.uk/itm/BMW-E85-E86-Z4-REAR-BUMPER-BLACK-GENUINE-A3129-/321900140011?hash=item4af2be55eb:g:2YIAAOxyItRTeeMm
http://www.ebay.co.uk/itm/BMW-Z4-2003-2006-BUMPER-REAR-/141793907376?fits=Model%3AZ4&hash=item21039352b0:g:zV4AAOSwNNxWE43a
http://www.ebay.co.uk/itm/BMW-Z4-PRE-FACELIFT-E85-REAR-BUMPER-GENUINE-BMW-PART-O8-/131506530304?hash=item1e9e666800:m:m4hSokU8lyjuhWOB430fwhw
Click to expand...


That first ebay link is my bumper! ;) I havent looked on the inside about the holes, wont be able to check before Wednesday I'm afriad but feel free to contanct me directly on here to cut out the middle man! ;)
 
If you could look mate that would be great,

Pictures of the back would be good too if possible.
 
hopz121 said:
Moheddine said:
paddy wright said:
Are the holes not marked for drilling as the headlight washers are on the front? Might be worth doing to the good one without PDC?
Click to expand...

I think you're right - have heard this too
Click to expand...

I didn't think that it was just a case of drilling holes, They clip into holder on the back of the bumper (at the back of the hole)

On this M Bumper you can see the rear of it and the mounts that the sensors clip into, I don't think the non PDC bumper comes with the mounts fitted. (I maybe wrong but thats what i currently understand)

http://www.ebay.co.uk/itm/BMW-Z4-E85-E86-M-SPORT-M-POWER-REAR-BUMPER-IN-SILVER-B318-/271998775891?fits=Model%3AZ4&hash=item3f5463f253:g:iWoAAOSweW5VP~dg
Click to expand...

If they are not there I'm sure you can plastic weld the ones you already have back on to the new bumper!
 
i can check for you tonight Hopz, my standard (facelift) bumper (no PDC) is currently laying in the corner of my living room along with my sideskirts lol.

from memory you are all correct, the holes are market but u have to drill, then fit the brackets etc to retro fit them
 
Thanks Jingle, Would be great if you could check,

I dont want the hassle of drilling holes and sticking on bits and stuff, ill just hold out for one with PDC :)
 
yea i made a point of getting 1 with PDC already there as was much less hassle. will try my hardest to remember to take some photos before i shoot off to football training :)
 
Hi mate, sorry i didnt get round to it last night, was busy as hell, but managed to get the snaps so i can upload now...

as suspected its just a small square with a cross inside to show the center for the hole to be drilled, there will need to be a bracket etc to be attached somehow so much easier to just buy a new bumper with PDC holes already there.

photos for reference and for others to see :thumbsup:

FACELIFT REAR BUMPER (UK spec):

Drivers side:


behind number plate:

passenger side:
 
Yea I'll wait for one with holes cut inc brackets etc I think.

Thanks for finding that for me jingle :)
 
You must log in or register to reply here.
Back
Top Bottom