WANTED: 19" tyres

J

JINGLE

Veteran
 Norwich, Norfolk
ok so im ready to buy some new 19" wheels (FINALLY!!!) but to try and offset the cost i was wondering if anybody has some 19" tyres for whatever reason going cheaper than a full new set (already purchased a new full set of 18" last year!)

front: 225/35/19
rear: 255/30/19


let me know whats available people :D
 
How much out of interest?

Was hoping to stay away from new prices, part worns 3-6mm will be half price if that is all
 
I have some part worn M3 conti's from my old m3, but the profile sizes are one more up than what your asking for.

Front - 225/40/19
Rear - 255/35/19

Not sure if these are any good but PM me if interested.
 
srhutch said:
Will have a pair of brand new Vred Vorti's for sale next week. 265/30 R19

Don't ask why :oops:
Click to expand...

I might be interested in these fella. Have you got the fronts as well?
 
I will check but i might have both sizes your after Falkens legal just but not too much left on the rears.

You can have them. I wont be at the workshop to check for a while. I might be there Sunday.
 
Yorkie Z said:
Camskill is your best bet
Click to expand...

thanks mate will take a look :thumbsup:

Machine monkey said:
I will check but i might have both sizes your after Falkens legal just but not too much left on the rears.

You can have them. I wont be at the workshop to check for a while. I might be there Sunday.
Click to expand...

yes please mate, basically my new set up is going to be so close I don't really want to go forking out loads for a full set of new rubber in case I then have to sell them straight away to buy another set up and lose money on them.

according to willtheyfit.com my new wheels will sit 20.7mm further out than my current wheels.... however when I had my 25mm spacers on they rubbed slightly on the outer edge so the 4.3mm gap is going to be VERY tight. im hoping that as the new wheels are 9.5J the inner edge will be in contact with the road nearer the springs so casuses less of an angle and therefore has more arch gap..... if that makes sense??? basically im just gonna have to but some wheels and tyres and see how it goes and pray it all works lol

for reference my set up is:

lowered on H&R springs (-30mm)

current:
225/40/18 tyres on 8J ET47 fronts
255/35/18 tyres on 8.5J ET50 Rears (<---these rubbed with 25mm spacers on)

new set up:
225/35/19 tyres on 8.5J ET45 fronts
255/30/19 tyres on 9.5J ET42 rears (willtheyfit.com says the outter edge will sit 20.7mm further out than current 108s so gonna be tight!!)
 
didn't realise I could link it, heres the old vs new set ups:

Fronts: http://www.willtheyfit.com/index.php?width=225&aspect=40&diameter=18&wheelwidth=8&offset=47&width2=225&aspect2=35&diameter2=19&wheelwidth2=8.5&offset2=45&Submit=Calculate

Rears: http://www.willtheyfit.com/index.php?width=255&aspect=35&diameter=18&wheelwidth=8.5&offset=50&width2=255&aspect2=30&diameter2=19&wheelwidth2=9.5&offset2=42&Submit=Calculate
 
I have 2 x 225/35/19 RFTs with 7mm remaining for sale if they're any use
http://www.z4-forum.com/forum/viewtopic.php?f=7&t=86369
 
You must log in or register to reply here.
Back
Top Bottom