So I had a noisy vanos and thought I'd get this looked at.
I went to technosport, spoke with George who seems like a great guy. He kept the car for a few days and could not figure out what the noise was and wanted to do a vanos swap to see if it was the vanos. Given the cost of this I thought I'd take it to Phil at CPC for a second opinion, within 2 mins of listening he told me it was nothing but a noisy vanos gear!
I ended up getting Phil to do full vanos refurbish with the following parts;
Vanos Seals (Besian)
Anti rattle kit (Besian)
Phil repaired the Solenoid coil pack, the same way Besian would
Hack engineering drilled smaller holes in my oil pump disc (again to the same specs as Besian)
Replace all 12 vanos cam bolts (he did mention that the existing bolts were all tight)
I'm trying to get some pics from him which he took but as most of you he's quite a difficult man to get hold of.
Have to say his work is fantastic and the car is definitely quieter and smoother and feels nicer to drive. At the same time he replaced by RTAB with Rogue engineering limiter kit and that has made a big difference to handling (especially with a custom alignment).
Would defo recommend Phil to anyone looking to do vanos work or antything else (also Hack engineering can provide the Besian parts and they are located in the UK which helps!)
I went to technosport, spoke with George who seems like a great guy. He kept the car for a few days and could not figure out what the noise was and wanted to do a vanos swap to see if it was the vanos. Given the cost of this I thought I'd take it to Phil at CPC for a second opinion, within 2 mins of listening he told me it was nothing but a noisy vanos gear!
I ended up getting Phil to do full vanos refurbish with the following parts;
Vanos Seals (Besian)
Anti rattle kit (Besian)
Phil repaired the Solenoid coil pack, the same way Besian would
Hack engineering drilled smaller holes in my oil pump disc (again to the same specs as Besian)
Replace all 12 vanos cam bolts (he did mention that the existing bolts were all tight)
I'm trying to get some pics from him which he took but as most of you he's quite a difficult man to get hold of.
Have to say his work is fantastic and the car is definitely quieter and smoother and feels nicer to drive. At the same time he replaced by RTAB with Rogue engineering limiter kit and that has made a big difference to handling (especially with a custom alignment).
Would defo recommend Phil to anyone looking to do vanos work or antything else (also Hack engineering can provide the Besian parts and they are located in the UK which helps!)