Usb / Aux Connector - Question for Dave

[Deepseaskateboard]

@AnubisZed

I have searched in the forum, you mentioned it before but I can't find it!

Is there a dual aux connector which has an additional aux connection at the back of the module, to allow the android head unit to be wired in from the back?

I think you said it was from an X6.

I think it fits the Z4...

Many thanks!

 

[AnubisZed]

This is the type I was talking about....

Pardon our interruption...

It has the 6 pin plug as opposed to the standard 4 pin (for the AUX side).
I'll find my wiring diagram out, but basically I wired a trailing 3.5mm jack socket to the secondary side (would have come from the Media phone mount). Obviously you can't operate both inputs at the same time, but it does give a neater appearance without having a plug and wire in the socket.
I did this for a couple of reasons,
1) Because it was neat
2) Because I can

 

[Deepseaskateboard]

Thanks Dave,

I'm guessing an aux female port has to be soldered to this?

Does the front port over-ride the back automatically? Or does it need additional wiring to do this?

 

[AnubisZed]

I've attached two wiring diagrams, one being the standard existing 4 pin (only 3 pins are used) and the other is the 6 pin one modified to show how I wired in the additional female AUX socket. And how the socket is wired.

 

[Deepseaskateboard]

I've attached two wiring diagrams, one being the standard existing 4 pin (only 3 pins are used) and the other is the 6 pin one modified to show how I wired in the additional female AUX socket. And how the socket is wired.

Very kind of you. Thanks!
I am aiming to do this project this year!!