Standard 3.0l exhaust tips all gone to Ben g

M

Machine monkey

Lifer
 In the shire Oxfordshire
As the title got some tips going Sapir I know a few people have corroding problems. I will take them into work and Give them a quick polish on the polishing mop. They should come up almost new :D don't want anything for them excepted a good home on a well looked after zed. Obviously I don't fancy paying the postage that's down too who wants them :thumbsup:
 
Hear are some pics B4
exhtip1_zpsde60c217.jpg

After a bit of a polish
exhtuip2_zps365c3d8d.jpg


Look almost as good as new. I will put them in the post at lunch :thumbsup:
 
Yes there are 2 screws underneath they can take a bit of a wiggle. But they should come straight off. I used a polishing wheel on a off hand grinder.
 
Slowly building up info from hear. Trouble is i have the Homer Simpson effect. I hate to think what i am forgetting.
 
Yes Taz just a couple of M5 - M4 bolts. They take a bit of tugging. If send them to me i will polish them up for you. As long as they are not all rusty they should look almost new :thumbsup:
 
Machine monkey said:
Yes Taz just a couple of M5 - M4 bolts. They take a bit of tugging. If send them to me i will polish them up for you. As long as they are not all rusty they should look almost new :thumbsup:
Click to expand...

That's another job to the list :oops:
 
Machine monkey said:
Yes Taz just a couple of M5 - M4 bolts. They take a bit of tugging. If send them to me i will polish them up for you. As long as they are not all rusty they should look almost new :thumbsup:
Click to expand...


i will have a look tonight :)

i'm quite good at tugging things :oops:
 
You must log in or register to reply here.
Back
Top Bottom