Spacing wheels out?.

[GaZ31]

Hi Team,

I'm thinking about spacing the turbine wheels out on my 3.0 ltr SI.
I've seen a kit on EbayUK with extended bolts, 12mm on the front and 15mm on the rear.

I'm wondering what others have done or what your advice is before i buy the kit?

Thanks in advance.
Regards,

 

[Rsipad]

I think I went 20mm and 15mm on my 3.0i with style 200s. Think it ended up close to flush on oem non-sport suspension, but the turbine wheels are probably a different offset.

I'd recommend going with a stud conversion rather than longer wheel bolts. Makes it much easier to swap wheels and add/remove spacers without dealing with wrong sized bolts or stripping the threads in the hub. Just keep in mind that tire shops might not touch the car if it uses studs/nuts instead of bolts due to liability (but that's also here in sue first ask questions later USA, ymmv).