SOLD - Z4 Coupe 3.0Si Back Box

I

idej_z4

Senior member
Not sure if this will even be of any interest to anyone but thought I would give it a try...

The back box from my Z4 Coupe 3.0Si is for sale.

The tips are in pretty good condition. I gave them a quick scrub, but if someone was to spend a bit of time with them I'm sure they could get them a lot better. The back box has been on my car which has only done 30k miles (if that makes any difference).

Price revised due to feedback below - £70 ono

Collection from West Yorkshire...or possible delivery to Yorks / Lancs if needed.

IMG_2919.JPG

IMG_2920.JPG

IMG_2921.JPG

IMG_2922.JPG
 
Personally I'd say that's double what they go for. Can get a full original system for £99, check Ebay. Keeping an eye on used Z4 exhausts is a bit of a thing with me at the mo :)

Might also be worth a photo showing where it's actually been cut from the car.

It's also on Ebay for £20 less, meaning it's actually £28 more expensive on here once fees are taken into account... http://www.ebay.co.uk/itm/BMW-Z4-3-0si-Exhaust-Back-Box-/232193676301?hash=item360fd2540d:g:gd0AAOSwA3dYamoS

Mike
 
Ducklakeview said:
Personally I'd say that's double what they go for. Can get a full original system for £99, check Ebay. Keeping an eye on used Z4 exhausts is a bit of a thing with me at the mo :)

Might also be worth a photo showing where it's actually been cut from the car.

It's also on Ebay for £20 less... http://www.ebay.co.uk/itm/BMW-Z4-3-0si-Exhaust-Back-Box-/232193676301?hash=item360fd2540d:g:gd0AAOSwA3dYamoS

Mike
Click to expand...

Thanks for the heads up! I'll revise and add additional photo. :)
 
Looking at where that's been cut, right on the bend - it'll be awkward to refit unless it's welded, there isn't enough room in that area to fit flanges, and sleeves won't fit on a curved section. Just a heads up..

Mike
 
Ducklakeview said:
Looking at where that's been cut, right on the bend - it'll be awkward to refit unless it's welded, there isn't enough room in that area to fit flanges, and sleeves won't fit on a curved section. Just a heads up..

Mike
Click to expand...

Thanks. :) I'll leave it up for a few days and see if anyone makes me an offer, if not I'll just scrap it!
 
idej_jedi said:
Ducklakeview said:
Looking at where that's been cut, right on the bend - it'll be awkward to refit unless it's welded, there isn't enough room in that area to fit flanges, and sleeves won't fit on a curved section. Just a heads up..

Mike
Click to expand...

Thanks. :) I'll leave it up for a few days and see if anyone makes me an offer, if not I'll just scrap it!
Click to expand...

I wouldn't scrap it, it's still of use, but just a bit more involved than a simple swap..

Mike
 
If you do scrap, take the tips off. They just pull off with a twist to help. They are not cheap, so cleaning them up and selling on could nett a few quid.
 
srhutch said:
If you do scrap, take the tips off. They just pull off with a twist to help. They are not cheap, so cleaning them up and selling on could nett a few quid.
Click to expand...

Thanks buddy! :)
 
idej_jedi said:
Not sure if this will even be of any interest to anyone but thought I would give it a try...

The back box from my Z4 Coupe 3.0Si is for sale.

The tips are in pretty good condition. I gave them a quick scrub, but if someone was to spend a bit of time with them I'm sure they could get them a lot better. The back box has been on my car which has only done 30k miles (if that makes any difference).

Price revised due to feedback below - £70 ono

Collection from West Yorkshire...or possible delivery to Yorks / Lancs if needed.
Click to expand...

I thought i had first dibs on the tailpipes !!! :headbang:
 
You must log in or register to reply here.
Back
Top Bottom