I could see a couple blokes with too many pints in 'em. "D'ya shuppose it'll shtop openin' if I shtick me finger in 'ere?"bladeowner said:Maybe it's to stop finger trapping.
bladeowner said:I think Stu86 may be right, it could be a folding issue. Mine doesn't latch if the folding is not right the bulletin pic is not good. Below are pics of mine right and wrong.
Should NOT fold like this:
HTH20130419_155011_zps89832abb.jpg
Should fold like this:
20130419_155020_zps6d7c4dcc.jpg
If it's folded correctly the roof goes all the way down and latches properly.
You see in bladeowners picture there a wear mark on the edge of the fabric hood. The trim edge. Pull that but out when folding exactly where the wear mark is with your finger.SonnyA85 said:bladeowner said:I think Stu86 may be right, it could be a folding issue. Mine doesn't latch if the folding is not right the bulletin pic is not good. Below are pics of mine right and wrong.
Should NOT fold like this:
HTH20130419_155011_zps89832abb.jpg
Should fold like this:
20130419_155020_zps6d7c4dcc.jpg
If it's folded correctly the roof goes all the way down and latches properly.
how do you make it fold right?
also i don't see much difference between the first and second pic. just that 1 bit of fabric is taught in the second and loose in the first. how would you fix that?