Small wiring block

[T2FFN]

Where can I source a the small wiring adapter block that the aux in and cd changer wires slot into on the back of the head unit? My aux in cable only accommodates the aux in cables in the back of the head unit, so the cd changer cables are left disconnected. I need to have both plugged in to route audio from the tv tuner...

Thanks

 

[pvr]

Not sure what you mean, but can't you move the cables from one block to the one you are connecting? That is what I had to do when I had an Icelink in my old Z (if I understand you right that is ...)

 

[srhutch]

Not sure what you mean, but can't you move the cables from one block to the one you are connecting? That is what I had to do when I had an Icelink in my old Z (if I understand you right that is ...)

As PVR said you need to take the pins out of one and put in the corresponding spaces in the other which should be vacant.

 

[T2FFN]

If only it were that simple. The connectors supplied on the aux cable are individual plastic pins that don't fit the existing connector block. If I could find suitable pins I could swap them over on the cables. Considering buying another aux cable with a better connector on the end that will be more compatible with the existing wiring/pins so they can all be retained.

 

[T2FFN]

Found this in the end. It's called a quad lock connector, and can be bought with the inner and outer plastic parts, and a dozen pins for a couple quid on eBay.