Side skirt removal

[GJ1]

Hi,

I have a loose side skirt so want to remove it and replace the rivets. I'm guessing this is relatively straightforward but are there any hidden dangers I should be aware of? Does anyone know of any how to videos/photos?

Thanks

 

[Number5]

Basically there's one bolt inside and at the bottom of each Wheel arch ( back and front) and about 6/7 pop studs on the underside of the car, so just jack it up a little and get those out. Once they're all removed, open the car door and lift it from the bottom and it will unclip fairly easy, releasing the 6 or 7 re-useable clip fittings along the top edge. It takes about 10 minutes per side.

 

[GJ1]

Basically there's one bolt inside and at the bottom of each Wheel arch ( back and front) and about 6/7 pop studs on the underside of the car, so just jack it up a little and get those out. Once they're all removed, open the car door and lift it from the bottom and it will unclip fairly easy, releasing the 6 or 7 re-useable clip fittings along the top edge. It takes about 10 minutes per side.

Seems relatively straightforward then. Will give it a go when I get some replacement clips.

Cheers