Show me your CSL reps.

[mr wilks]

Offsets are 26 rear / 34 front

You sure about those numbers Nick :? The rears don't sit in the arch like et26 ?

Haven't checked them Andy, took the info from your advert when you sold them http://www.z4-forum.com/forum/viewtopic.php?f=7&t=56823

Must assume they're correct then :? I would have guessed at around 40/45 from the pics though . Whatever they look he part

 

[LostBoy_84]

 

[no fit state]

Here's mine sitting on CSL reps from CM wheels.

 

[Z4M-2006]

 

[GJC72]

Here you go. My old 3.0si with 19inch reps and lowered on eibach's


That looks great. Same as mine, lowered on Eibachs.

Do you know what offset they were? Tyre sizes?

Was there any rub?

They were 8.5 front, 9.5 rear et40 all round. Front tyres were 235/35/19 rears 265/30/19. No rubbing on the rears but the fronts had worn holes in the arch liners. If i'd kept the car i was planning to drop down to 225/35 on the front and 255/30 on the rears. Interestingly seemed to get less rub after lowering.

 

[mr wilks]

Interestingly seemed to get less rub after lowering.

Slightly stiffer springs possibly ?

 

[Jollyjoiner]

Mine are 18's 8.5" front 9.5" rear with an et35

 

[LostBoy_84]

Mine are 18's 8.5" front 9.5" rear with an et35

Those aren't CSL reps are they? Look more like 1M reps

 

[KERMIT1970]

I like them had them on 3 of my old cars & going to buy a set of winters for the m4 great looking wheels

 

[Jollyjoiner]

Mine are 18's 8.5" front 9.5" rear with an et35

Those aren't CSL reps are they? Look more like 1M reps

I think they look more like the cls than the 1m but I know where your coming from

 

[DanEvs]

Wheels have arrived and are absolutely stunning. 19" Riva DTM's from CM Wheels. Bonus is that they're about 1.5kg lighter than a 108. 8)

Has anyone tried a 225/40x19 on the front? I'm keen to keep a high aspect to maintain ride quality.

 

[stevespg]

has anyone fitted these from CM? and able to offer comment on fitment and offset suitability

18'' Staggered CSL Style Wheels

Hyper Silver

To fit - E9x / E36 / E46 / Z4

Specification

Front - 18x8 et38

Rears - 18x9 et42 - Deeper Concave

 

[Molinites]

CM Wheels Riva DTM CSL reps. 18" concave rear staggered fill the arches better.
Love them.

 

[R10 WST]

These are shadow black Axe cs lights 19" with e46 m3 off set

 

[Bkbkbk84]

Looking at CSL reps today at BM and wanted to know if anyone has any input as to which of these between a rarer fitment of atomic’s or the Riva Dtm.. is there a better looking wheel in terms of finish etc? The atomics look brighter in colour and have the embossing etc.. slightly different specs but offsets seem to counteract width. Any thoughts? On a m sport suspension E86 coupe in carbon black..


Atomics-



NOW BACK IN STOCK!! (29/5/2020)

Brand new high quality light weight 19" staggered Atomic CSL alloys with deep concave rear finished stunning hyper silver. (SATIN GUNMETAL ALSO AVAILABLE IN OTHER ADS)

Very rare fitment with the et45 rear for a direct fit to the Earlier 3 series cars and Z3/4, even will go on a 1 series.

As you can see in the pics these have the correct spoke profile with even Concave from edge of wheel to centre to give them the best possible look

They are 19" x 8.5" et38 front and 19" x 9.5" et45 Deep centre rear



OR

Brand new 19" staggered Riva DTM CSL alloys with deep concave rear finished in silver.

These must be seen as look stunning.

They are 19" x 8" et34 front and 19" x 9" et37 Deep concave rear.


Any info is highly appreciated. Want to run a 35 tire on back to help with ride and filling arch on standard suspension..