S2000 seats fitted.

[Jakg]

Mine is lowered on Eibachs, but they defo sit slightly lower than the standard seats, but not by much. I now see less of the bonnet than i could before, and i ran the old seats on the lowest setting.

ok thanks - I’ll try the flat bar mounting and if that fails then I’ll go down the S2000 route.

 

[Jakg]

Got the Corsa VXR seats mounted, I have the Z4 seats on the lowest setting and these are quite a bit higher. Very nice seats though so need to work out which I prefer.





I mounted them on a flat bar and adjusted the Corsa VXR rails to fit

 

[Z4 Gaz]

They look great, just a shame they can't be made to sit lower and further back or I would be all over fitting some to mine.

 

[DOOM]

Nice one!!
What about the seat belt pretensioner?

 

[highway1]

I might have to see if I can fit my Dads Honda Civic (2007) seats in my Coupe!

I much prefer cloth seats (like my sofas!) to the crap leather(vinyl) in cars!

 

[LittleZ4]

Love threads like this. I'm continuously looking for different seats to fit. Those vxr ones look great.

 

[Jakg]

Nice one!!
What about the seat belt pretensioner?

I used the BMW ones. Just had to drill them out slightly.

More info https://www.pistonheads.com/gassing/topic.asp?h=0&f=47&t=1755842&i=45

 

[Z4 Gaz]

Just thought I would update this thread.

One weekend ages ago when at a loose end I decided to slice up the old seats for the heating elements. Trimmed them down to size and fitted to the S2000 seats, base and backs.