RTAB Limiters

[Machine monkey]

I can't nate I think I used 1/4 or 5mm plate. The ID and OD is easy to figure out as is the taper needed. Get the trailing armed off and go from there buddy

 

[abar121]

Do a search, this has been covered before. They used to be about £10 plus postage. Probably a little more now we're all poorer.

http://www.rmeuropean.com/Products/093031010-MFG523.aspx

 

[G600]

I can't nate I think I used 1/4 or 5mm plate. The ID and OD is easy to figure out as is the taper needed. Get the trailing armed off and go from there buddy

Thanks, that was my plan B but I thought I'd see if anyone knew the answer to save taking it apart and then putting it back together while I make the spacers, I'll update this once I've done it incase anyone wants the measurements in the future.

 

[Ducklakeview]

Think I paid around £19 all in from Ebay in the end. The difference is noticeable though..

Mike