Roof issue

[GAN1]

Hi all
I'm just in the process of relocating my roof motor. I've hit a problem where I cant get the short hydraulic pipe to allow me to get the motor into the boot because it's the wrong side of a bar, the opposite end to the pump and motor. Can anyone suggest how I manage to get the pipe the other side to give me enough length to get the motor in the boot.
Thanks Guy

 

[Anonymous]

May sound silly but unbolt the pipe from the pump and re route it as required then bolt it back on . Top up the fluid. The pump is self bleeding so it should be fine .

 

[GAN1]

Yeah was gonna do that but I was told they usually leak once they've been undone and I don't have any spare seals. Probably end up giving it a go though. Cheers.

 

[Anonymous]

Unlikely to be honest, just make sure you get all the cooper washers back on and you should be fine .