Rocker Molding Clips

S

spielnicht

Member
 Virginia
Seems like driver side rocker molding was removed at some point before I bought the car and I found some of the clips that secure it broken. Not a big deal, but the slight gap when the door is open feeds my OCD.

I've already replaced #2 and #3 in the diagram below, but the clips (#5) are just not gripping the car tightly. Question I have is, are there any receiving caps that I also need to get where the clips clip in, or just the clips themselves (#5)?

diag_5xtc.jpg

open-uri20160729-26725-rq9oua.


Thanks in advance.
 
Think they are the kick plate clips?

Worth after a few years to take these sills off as mud collects behind.
Yet i still have not removed the left one.

Part 4 rubber fills gap between body and the sill.
trim.jpg
If missing just buy some U channel rubber on Ebay and push in gap, BMW rubber is too expensive.
 
Yes, they're the kick plate clips. I'll try cleaning things up before I order the clips and see if that fixes it. Thank you.
 
I remember now they are on the inside of the sill.

There are similar one's that hold the kick plate down, but smaller and white.
 
You must log in or register to reply here.
Back
Top Bottom