Retrofit Cruise Control - North London

[sharif]

Hi all,

Is there anyone that is able to retrofit cruise control in the North London area? I have the stalk and wiring but the existing cowling will need to be modified.

I usually go to RBM in Hampshire but wanted to see if any forum members are able to offer the service locally at a cost.

Many thanks,

Sharif

 

[Zedebee]

Many members have done it themselves, it’s not a difficult job. It helps if you have a Dremel with a cutting blade, but other cutting tools will do. The cutout is marked on the inside of the cowl already.

 

[Jembo]

There is also an additional missing wire that needs to be added on the Z4M

 

[srhutch]

There is also an additional missing wire that needs to be added on the Z4M

It’s no different to any other E85/6 Jem.

 

[Jembo]

There is also an additional missing wire that needs to be added on the Z4M

It’s no different to any other E85/6 Jem.

I thought you had to run an extra wire when you retrofitted mine Steve - with my old 3.0, it was a straight plug & play

 

[srhutch]

There is also an additional missing wire that needs to be added on the Z4M

It’s no different to any other E85/6 Jem.

I thought you had to run an extra wire when you retrofitted mine Steve - with my old 3.0, it was a straight plug & play

No just the standard loom, only difference is the terminal on the ECU end.

 

[Rucky]

Theres a link to a how to here

https://z4-forum.com/forum/viewtopic.php?f=11&t=113856

 

[sharif]

Thanks for all the replies, fingers crossed going to try and install it next weekend.