Retro-Fit Wind Deflector/Roll Hoop Inserts

H

Hizza

Member
After winning them on e-bay last weekend I've now retro-fitted the wind deflector and mesh roll hoop inserts. It was all pretty straightforward although prising the black/silver roll hoop covers apart was a pain, particularly as it was around 4 degrees and the plastic felt very brittle, as did my fingers after half an hour. I also had to drill into the silver covers which involved some very careful measuring and alignment. I realise this thread is "WORTHLESS WITHOUT PICS"! :oops: but if someone can point me in the direction of instructions on how to upload pics into a thread I'll do a "how to" as I took plenty of photos. If anyone is thinking of doing this and is near Northampton I'm happy to advise/help.

Cheers

Hizza
 
Create an account on Photobucket (or similar) Up Load pictures to Photobucket from your PC then copy the URL image code address (IMG http link) from the PB site and paste into the reply box on the forum.
Preview and arrange links to suit before you submit.
There is a 'how too' somewhere but basically if you do 'the above' should be all you need. :thumbsup:
 
You must log in or register to reply here.
Back
Top Bottom