Resetting the airbag fault light after window mech change

[Duggie]

Brain prod

Yesterday I changed the drivers side window mech, and during the process had to remove the airbag. The door is all fitted back together and working wonderfully but the airbag light is on. I have connected my OBD reader but It is showing no faults. Does anyone know how to get the airbag light reset?
Is it a dealer reset, or a turn this, push that and hop on one leg while singing a Kylie hit?
Any help would be greatfully received

 

[bcworkz]

Dealer reset.

 

[cj10jeeper]

Or any indie with the right kit.
Dealers charge around £50 :thumbsdown:

Next time you'll remember to disconnect the battery and not turn on the ignition with the airbag disconnected

 

[Duggie]

Or any indie with the right kit.
Dealers charge around £50 :thumbsdown:

Next time you'll remember to disconnect the battery and not turn on the ignition with the airbag disconnected

Oh cock, so I did it to myself :headbang:

 

[cj10jeeper]

Or any indie with the right kit.
Dealers charge around £50 :thumbsdown:

Next time you'll remember to disconnect the battery and not turn on the ignition with the airbag disconnected

Oh cock, so I did it to myself :headbang:

Yes - many have inc. me once by accident. For safety you should always disconnect the battery several minutes before disconnecting an airbag.

 

[mrlozzer]

Thanks for the heads up. Must remember to disconnect the battery before taking off the airbag when changing my steering wheel!! No trips to the dealers for me...

 

[DiagnosticMan]

Duggie, Hello mate is the airbag light still off, glad to be of assistance

 

[Duggie]

Top job mate, all clear till now, well worth a £10. Big cheers to you