Replacement carbon fibre BMW badges?

S

stjohnsmythe

Member
I've used the search function but don't seem to have too much joy finding out what I need to know :(

Can anyone advise the best place to get these? There are tons for sale on ebay but I want to make sure I get some good quality ones.

Also, can someone provide the correct measurements for the boot, bonnet, side and wheel cap badges? Just want to make sure I'm ordering the right sizes.

Finally, am I right in thinking that bonnet badge will take some work to fit properly?

Cheers!
 
Alot of us used this guy not sure if he has any in stock at the moment, but drop him a line and see what he says.

IIRC the badges you will need are

1 x 73mm for the Bonnet
1 x 45 for the Steering Wheel
3 x 82mm for the boot, and side repeaters.
4 x 65mm for the wheels
 
RichardG said:
Alot of us used this guy not sure if he has any in stock at the moment, but drop him a line and see what he says.

IIRC the badges you will need are

1 x 73mm for the Bonnet
1 x 45 for the Steering Wheel
3 x 82mm for the boot, and side repeaters.
4 x 65mm for the wheels
Click to expand...

Thanks. Did you have to modify the bonnet badge for it to fit?
 
The first one I had I cut bits away with dremmel, then on seeing the fit of what I assumed were other peoples OEM badges which did'nt fit as flush as I thought when I changed my bumper recently I did nothing other than stick a new one on with silicone including leaving the lugs on to locate in the original badges holes.
 
You must log in or register to reply here.
Back
Top Bottom