Reasonable cost for wheel alignment?

If i remember right, he said they were within spec, and you can only adjust them so much, before you start putting something else well out.. but will ask when i take it back in a couple of weeks for the free re check.. :thumbsup:
 
davecci said:


This is mine, after taking it to recommended one by" alignmycar" in melton mowbray, cost me £75 in total.. :thumbsup: sorry if picture comes over to big....


Looks the same as Kwik Fit print outs..
 
Raj_UK said:
paulgs1000 said:
Raj_UK said:
Cheers Bing. That close to what I've been quoted. £65 + vat, £85 + vat if camber needs doing, on a hunter. Not sure if its still £65 if no adjustment is needed?

I paid £120 at one place (and didn't go back :cry: ) and was charged £75 at another place which took me through the full process, explaining all the changes and offering bespoke settings according to the type of driving and feel I preferred - all good stuff and I thought excellent value. :thumbsup:

What happened at the first place Paul?

It was recommended by the place that fitted my tyres - the front man was very friendly and reassuring - I asked to see the print out and set up - he agreed and I got to see the (very) young lad that seemed lost trying to set up the Zed and couldn't und a bolt also no weight put in the Zed before setting up . . . . when I got the Zed back I wasn't convinced by the set up it felt very tippy at the front and I got a photo of the computer screen which meant nothing to me when it was done - turns out it wasn't too bad when I had it checked at the next place but it did have a very aggressive set up on the front and the rear camber was out on one wheel. I didn't go back to complain - I didn't fancy them working on it again. . . . :cry:

At the next place, AK Automotive - they race MX5s so were very on the ball about set ups - weight in the car before beginning and a discussion about all aspects - really involved experience and filled me with confidence - I was under the car with them for all the work. When they had to use heat on the track rod ends they cooled off the metal with cold wet rags before doing the adjustments - all little pointers to them knowing and caring about what they were doing. And they were cheaper. I'm going to have a bit more aggressive set up when I go back as I think I prefer more turn in - great to have that option though :thumbsup:
 
Glad it ended well though. I had a similar experience at kwikfit on a previous car. I got my alignment checked when having some tyres fitted, though my steering and handling was sweet. They did some minor adjustments. Within 50 of driving I knew something was seriously wrong. I went back and they put it on the machine and things were way out. It then took three of them reading the settings etc to get it anywhere near normal. Needless to say I went and got it done again elsewhere...
 
Rob_benton said:
I spoke to jps in the past and they seem to know what they are talking about. They should do as that's what they specialise in.
At least it won't by some spotty yts kid doing it.
Let us know how you get on.

Cheers Rob. That's reassuring to know! Hopefully get it done within the next two weeks.
 
Angelus666 said:
Thorney Motorsport in Milton Keynes are very good. Always took my CSL there for years, not cheap but know their stuff...

Didn't even think about them!! I've grown up with Vauxhalls so know all about them, though I've never visited!
 
Yep, they're great for VX220s and most BMW stuff....worth a visit just to see some of the race cars they always have in the workshop
 
Angelus666 said:
Yep, they're great for VX220s and most BMW stuff....worth a visit just to see some of the race cars they always have in the workshop

Would like that! I've still got a soft spot for the vx220!
 
mrh2019, if you look on my original post, it was recommended by Alignmycar and it is in melton, and it's a hunter machine.. maybe all hunter setup's do the same printout, even kwik fit's. .! :thumbsup:
 
I finally got round to getting the alignment done at the wheel alignment centre. Friendly bunch and seemed to do a good job. They did point out that the hunter settings requested more negative camber at the back but the adjustment was maxed out on the o/s. They adjusted the n/s/r camber to match resulting in a very similar print out as davecci posted. However I was low on fuel and they didn't put any weight in the boot. They agreed that fuel/weight would give it more camber but still didn't put any in!
 
aquazi said:
I used align my car to find my local in Derby... used them at least half a dozen times now over the years on various cars and charges 60+ vat for a Base scan and upto 6 adjustments!

And he even recently scanned my TT for free! And being a tight wad I took it to Audio with the print out for them to do it under the warranty ! :oops:

which one in derby did you use? need mine done
 
used these guys:
http://www.mcewansgarage.co.uk/

Need to take my TT over there over the next couple of weeks too!
 
Back
Top Bottom