I have 18 inch BBS CK wheels on Eibach springs yet the gap on the rear wheels in the arch is still not right, its to big a gap. I had the slings fitted when i ran the OEM 17's so is it a case of having the springs adjusted to the new 18's?
IMO I would say it's sitting pretty cool as is ... And I don't think there is any height adjustment possible.
What is the spring drop for the non m eibachs? As the m springs drop 10mm more at the front - this might be the same for non m?
The ride height looks fine as is IMO but looking at the offsets of the rear wheels, they look like they are sitting too far in the arches.
I would suggest some wheel spacers? Or is it just the angle of the pic?
i would agree with coupedan , try some 10 or 15mm spacers on the rear & it will transform your arch gap . Your offset looks to be around 47/50 whereas you can get away with 35
i would agree with coupedan , try some 10 or 15mm spacers on the rear & it will transform your arch gap . Your offset looks to be around 47/50 whereas you can get away with 35
