Pure water - what a difference

I might give that a try as it is rather a lot of work getting the hoses all reeled out for the different taps. Don't think the X5 will be enough with 10 litre can, but filling it twice is still more economical.
 
I was driven by efficiency (laziness) with my watering can mission. So much easier than messing with pipes. Agree the X5 will be a challenge on one can given the size of it!

Let me know how you get on buddy. Will also let you know how my pressure reducing experiment goes!
 
pvr said:
Although I am now using my DI from the "soft" tap of my Harvey water system, so hopefully I should get a lot, lot more use of the same DI.
That system looks interesting, do you have all your water run through the water system, or just specific taps? What ppm is the water coming out of it and any ideas yet on overall costs of running it? If it can cut out water spots all over the chrome taps then I'll be having a serious look at getting one :)
 
MickAdams said:
pvr said:
Although I am now using my DI from the "soft" tap of my Harvey water system, so hopefully I should get a lot, lot more use of the same DI.
That system looks interesting, do you have all your water run through the water system, or just specific taps? What ppm is the water coming out of it and any ideas yet on overall costs of running it? If it can cut out water spots all over the chrome taps then I'll be having a serious look at getting one :)
It's great,we've had a Harvey's whole-house softener for over a year, no limescale spots on taps or sinks and the shower screen stays clear. Running costs are effectively the cost of the block salt, we (3 people) get through 1 pack (2 blocks) every 2-3 weeks. The blocks are much cheaper if you have storage and can buy in bulk - have a look on eBay for 'harveys block salt' (the same size blocks are suitable for all the block salt softeners)
 
A jolly expensive habit but sure does make a difference. I found the ones I invested in for the detailing business I use to run ran out rather quickly, so the open hose technique and an air compressor were significantly more cost effective. Shame that's impossible in London!
 
RO water is £2.50 for 25l (according to my marine aquarium owning mate).Could I just use this through a watering can or mist it on with a pump sprayer?

I've been reading on dw that many people just dilute detailing sprays with suitable de-ionized/distilled water for a quick spray and wipe.
 
Dehumidifier still rates at about 50 ppm, so it will stain still.
 
pvr said:
Dehumidifier still rates at about 50 ppm, so it will stain still.

The number of times I have written this on detailing world beggars belief.
 
PerryGunn said:
MickAdams said:
pvr said:
Although I am now using my DI from the "soft" tap of my Harvey water system, so hopefully I should get a lot, lot more use of the same DI.
That system looks interesting, do you have all your water run through the water system, or just specific taps? What ppm is the water coming out of it and any ideas yet on overall costs of running it? If it can cut out water spots all over the chrome taps then I'll be having a serious look at getting one :)
It's great,we've had a Harvey's whole-house softener for over a year, no limescale spots on taps or sinks and the shower screen stays clear. Running costs are effectively the cost of the block salt, we (3 people) get through 1 pack (2 blocks) every 2-3 weeks. The blocks are much cheaper if you have storage and can buy in bulk - have a look on eBay for 'harveys block salt' (the same size blocks are suitable for all the block salt softeners)

My Kinetico softener is the same concept as the Harvey's, but when I use my TDS meter, the solids are a high post filter as they are pre filter. Having red up on ion exchange filters, it is swapping the calcium ions in the water for sodium, hence the TDS is not significantly lower. I therefore don't think my resin would last any longer than putting non softened water into it....or have I missed something?

Taps, shower screen all spotless & the softener test kit shows soft water, so know the kit is working correctly.
 
New resin in today & back to not having to dry the car, much better :thumbsup:

Need to research whether calcium or sodium exchange is moe efficient though, to decide if the soft tap or hard tap is a better cost to wash ratio.
 
What resin do you use PVR - Cedelite or Unger ? I need to get some more as mine's going off.
 
pvr said:
Yes, please do some research and let me know :D

Doesn't appear to be a lot of information about, but looking at the periodic table the atomic mass for Sodium is roughly half that of Calcium. If the resin filter has a certain capacity before it is spent & the resin no longer charged, it suggests the lighter atomic mass would make it last longer - Sodium has 11 electrons vs 20 for Calcium. So guessing softened is better for the longer filter life.

I believe I have one unsoftened outdoor tap & a softened one in the garage, I will check (softened, not that there is a tap 8) ) however, I think life is too short for me to run an experiment using one tap for resin life, then a few months later, the other :evil:
 
Bing said:
What resin do you use PVR - Cedelite or Unger ? I need to get some more as mine's going off.

This - with the funnel which you need.

http://www.daqua.co.uk/offers.htm
 
jamesbond said:
Hi

I use this, but may change to a different type soon

regards

http://www.theultimatefinish.co.uk/aqua-gleam.aspx?gclid=CLLx_eLv7MUCFdHMtAodHwMAHg


Way too expensive for what it is, the resin vessels are much better value.
 
pvr said:
Bing said:
What resin do you use PVR - Cedelite or Unger ? I need to get some more as mine's going off.

This - with the funnel which you need.

http://www.daqua.co.uk/offers.htm

Cheers PVR - much better value than the original site I got the vessel from.
 
This one: http://www.daqua.co.uk/divessels.htm

The 11.4 litre one.

Just need an open hose of day 10 meters to attach to it with one standard hose connector fitting.
 
Back
Top Bottom