PIN issue with MFSW kit

H

Heapy

New member
Hey

Having problems fitting the MFSW kit to my 3.0 as it would appear that the cruise control wires are already in PIN 9 & 10 where the retrofit cable is supposed to go. Does anyone know which PINs i should try instead?

Cheers
 
What year model as pre 10/2004 the cruise control loom is already fitted and goes nowhere near those pins. Post 10/04 it's spliced into 27 & 31 in the 54 pin connector on the LCM, plug X12

MFSW should be into pins 9 & 10 X10170

Are you looking at the right connector??

You cannot simply select alternative pins as your not using them simply to cross a partition and continue your own wiring the other side, but to connect into the bus

I can send you PDF files for both cruise and MFSW if you need to investigate more
 
The car is pre 10/2004 (Oct 03 i believe) therefore it would suggest my attempt at wiring in the dark was a bad idea! I had a quick look at the pictures you posted previously, and the connector in question was green.. however the one i located was white! I think i need to have another look later. Managed to splice into the light module connector ok though. Any PDFs gratefully accepted! :) Cheers
 
You must log in or register to reply here.
Back
Top Bottom