AndyW60 said:Gave it a go but well and truly stuck - I think it's a big un :x
buzyg said:Yup that will probably be repairable. Easy enough to repair it your self with a kit from flea bay. Takes about twenty minutes, including reading the instructions. :wink:
This is the kit I have.
http://www.ebay.co.uk/itm/Tubeless-Tyre-Repair-Kit-Car-Van-Vehicle-Wheel-Tyres-Puncture-Hand-Tools-Case-UK-/282173127205?hash=item41b2d43a25
Obviously you need a Compressor to re-inflate the tyre.
Unless it's a run flat, in which case your Screwed. :exitright:
RickRob said:buzyg said:Yup that will probably be repairable. Easy enough to repair it your self with a kit from flea bay. Takes about twenty minutes, including reading the instructions. :wink:
This is the kit I have.
http://www.ebay.co.uk/itm/Tubeless-Tyre-Repair-Kit-Car-Van-Vehicle-Wheel-Tyres-Puncture-Hand-Tools-Case-UK-/282173127205?hash=item41b2d43a25
Obviously you need a Compressor to re-inflate the tyre.
Unless it's a run flat, in which case your Screwed. :exitright:
How does that work?
I had assumed that professional puncture repairs were done from the inside with a mushroom-shaped piece of rubber, so that the pressure forced a good seal. Surely anything that gets inserted from the outside could pop out?
Smartbear said:RickRob said:buzyg said:Yup that will probably be repairable. Easy enough to repair it your self with a kit from flea bay. Takes about twenty minutes, including reading the instructions. :wink:
This is the kit I have.
http://www.ebay.co.uk/itm/Tubeless-Tyre-Repair-Kit-Car-Van-Vehicle-Wheel-Tyres-Puncture-Hand-Tools-Case-UK-/282173127205?hash=item41b2d43a25
Obviously you need a Compressor to re-inflate the tyre.
Unless it's a run flat, in which case your Screwed. :exitright:
How does that work?
I had assumed that professional puncture repairs were done from the inside with a mushroom-shaped piece of rubber, so that the pressure forced a good seal. Surely anything that gets inserted from the outside could pop out?
I've used those before (rats tails) never had a problem-it's pushed through the hole "doubled up" by the pick up tool.
The rats tails are rubber & coated in glue, excess length is trimmed off & they don't come out again![]()
Rob