Pic of my leak as its happening-

I had something similar on my drivers door, and my membrane is okay as well. What has worked for me 95% of the time is to raise the rubber seal up where the water is coming in. Its a bit trial and error Andy but the rubber seal can be easily pulled up. Its worth a try Andy as it might work for you. As they say, nothing to loose, everything to gain main :wink:
 
Swiftly said:
I had something similar on my drivers door, and my membrane is okay as well. What has worked for me 95% of the time is to raise the rubber seal up where the water is coming in. Its a bit trial and error Andy but the rubber seal can be easily pulled up. Its worth a try Andy as it might work for you. As they say, nothing to loose, everything to gain main :wink:
Click to expand...

This worked for me as well.

I also used some Gummi Pflege on the seals to clean and soften the rubber to gain a better seal.
 
xedbot said:
Swiftly said:
I had something similar on my drivers door, and my membrane is okay as well. What has worked for me 95% of the time is to raise the rubber seal up where the water is coming in. Its a bit trial and error Andy but the rubber seal can be easily pulled up. Its worth a try Andy as it might work for you. As they say, nothing to loose, everything to gain main :wink:
Click to expand...

This worked for me as well.

I also used some Gummi Pflege on the seals to clean and soften the rubber to gain a better seal.
Click to expand...



This worked for me too. I also tweaked the rubber underneath the door.
 
I had the same but my door seal had come unstuck. Reattached and all is fine.
I also cut a small hole in the rubber where the water collected, right in the corner so you can't see it.
Sorry, no pictures.
 
Swiftly said:
I had something similar on my drivers door, and my membrane is okay as well. What has worked for me 95% of the time is to raise the rubber seal up where the water is coming in. Its a bit trial and error Andy but the rubber seal can be easily pulled up. Its worth a try Andy as it might work for you. As they say, nothing to loose, everything to gain main :wink:
Click to expand...
Cheers mate-did you need to wedge anything under the rubber to permanently lift it?
 
Nope Andy, just lifted the rubber seal up. You will find the rubber will lift up quite a bit, again a bit of trial and error, it took me 3 attempts at positioning the rubber to finally stop the water!
 
Have you done a leak test with door panel off. I used silicone sealant to re stick membrane. Leak in exactly the same place.
The panel has to come off. Hose on window with door panel off . You will see which part of the membrane that needs re sticking.
 
Ooch said:
Have you done a leak test with door panel off. I used silicone sealant to re stick membrane. Leak in exactly the same place.
The panel has to come off. Hose on window with door panel off . You will see which part of the membrane that needs re sticking.
Click to expand...
Thanks but i lifted the bottom half of door card away from the door- membrane fine at the bottom
 
You must log in or register to reply here.
Back
Top Bottom