Parts clear out

[andrewr]

Hi all,

I have a few random parts which I need to clear out, as shown below. Please excuse the low quality iPad photos.

1. Facelift LCM - For Xenon cars. Part No. 6 965 399
Price: £50 plus p&p

Originally I planned to use the black front and transfer this into my car on to my original LCM, however I never got round to it.




2. Facelift Heater Vents - Black *SOLD*
Price: £5 plus p&p

Unfortunately, when I bought this the 2 lower slats had been broken, hence the low price


3. Silver Grey Inner Grills - 2003 Pre facelift - *SOLD*
Price: £10 plus p&p

A few minor marks but nothing too obvious



4. Standard Whip aerial
Price: £10 plus p&p



5. Silver Headlight Inner - driver's Side Pre facelift Xenon
Price: £10 plus p&p

Taken from an 03 reg xenon, has slight damage to the top edge. Also, the locating tabs have been cut to remove this from the headlight, I have tried to show this in the images. The locating tabs are not required as the inner part screws on to hold it in place. May be suitable as a replacement for a black inner, or respraying.





6. Orange Boomerang - passenger side
Price: Free plus p&p



Let me know if you have any questions,

collection preferred but happy to post at your cost, can be collected from Central London or Kingston upon Thames, Surrey.

Andrew.

 

[Sausageman]

I'll take the inner grills!

PMed.


Can't PM you for some reason.?

Anyway,

I can collect and pay cash on 26th if that's ok with you? If not, let me know and we can make other arrangements.

Cheers,
Dean.

 

[andrewr]

Hi Dean,

As mentioned in the PM, these have now sold. Another buyer PM'd me shortly after I'd posted the items for sale. Hope you have luck in your search.

All other items still available.

Andrew.

 

[chrisba]

Would the slats on the heater vents be repairable in your opinion?

 

[andrewr]

Would the slats on the heater vents be repairable in your opinion?

Both bottom slats have the end locating pins snapped off. I'm sure you could plastic weld some new pins or sink some metal pins into the plastic slats, but as I had a spare set I didn't bother trying.

Let me know if you're interested.

Andrew.

 

[danmiddle2]

Would the slats on the heater vents be repairable in your opinion?

I have a spare heater vent kicking about somewhere. It, too has some broken slats, but they are the vertical ones in the rear. I am sure with the two you could make a whole one? I'll see if I can find it, if it is of interest.

Dan

 

[Marvin-HHGTTG]

I'll take the heater vents at asking please! I've been looking (not particularly hard admittedly) for a new set, so maybe £7.50 inc postage?

 

[andrewr]

I'll take the heater vents at asking please! I've been looking (not particularly hard admittedly) for a new set, so maybe £7.50 inc postage?

Thanks for the message, the price is £10 plus p&p.

Many thanks.

Andrew.

 

[Marvin-HHGTTG]

...
2. Facelift Heater Vents - Black
Price: £5 plus p&p

Unfortunately, when I bought this the 2 lower slats had been broken, hence the low price
.

I might be wrong, but I was sure your post said £5 plus postage. :?

 

[andrewr]

...
2. Facelift Heater Vents - Black
Price: £5 plus p&p

Unfortunately, when I bought this the 2 lower slats had been broken, hence the low price
.

I might be wrong, but I was sure your post said £5 plus postage. :?

My mistake, you are correct. I thought i'd advertised it at £10 but i'm happy to honor this price as it's my fault. Let me know if you're still interested.

Andrew.

 

[Marvin-HHGTTG]

Easily done, shall we split the difference at £10 including postage as I'd have taken it at £10 plus anyway.

 

[andrewr]

Update - Grilles and heater vent now sold, all other items still available.

Andrew.

 

[Marvin-HHGTTG]

Received the heater vent on Friday, fitted today - thanks for the easy deal!

 

[andrewr]

Received the heater vent on Friday, fitted today - thanks for the easy deal!

No prblem, glad it arrived safely. Thanks for letting me know.

Andrew.