Parking Sensors fitted

The could've looked like this so good result I say!

2012-05-31181512.jpg
 
They don't look quite flush to me, but much better than the ones they tried to fob Carol off with.

I think the lesson here is get them to show you the sensors before you fit. I would go with the cobra ones that Carol mentioned and were fitted by a member that are truly flush and therefore give the small black ring (which is the gap)
 
not as bad as Carols but they really should have fitted ones like these:
http://www.cartronics.co.uk/BMW-Z4-E89-2012-retrofit-BMW-PDC-rear-parking-sensors
 
Actually thats not bad for retro fit. they are eeven in the same place as they are on mine positionally, which they are not on Carol's
 
tomscott said:
I think they look good. Nothing wrong with those in my eyes :thumbsup:

Agree - good result.

What display/sound do you get inside. Had o.e.m. front and back ones specced on my new 3 series and get an all-round display on the screen - very good as it indicates from green through yellow to red as you get closer to and object either front or back/
 
AlanJ said:
tomscott said:
I think they look good. Nothing wrong with those in my eyes :thumbsup:

Agree - good result.

What display/sound do you get inside. Had o.e.m. front and back ones specced on my new 3 series and get an all-round display on the screen - very good as it indicates from green through yellow to red as you get closer to and object either front or back/

There's also the tactile feedback option... keep going and when the car bounces, you're at minimum distance ;)
 
AlanJ said:
tomscott said:
I think they look good. Nothing wrong with those in my eyes :thumbsup:

Agree - good result.

What display/sound do you get inside. Had o.e.m. front and back ones specced on my new 3 series and get an all-round display on the screen - very good as it indicates from green through yellow to red as you get closer to and object either front or back/


That's exactly what you get on the idrive screen with OEM on Z4 too
 
Back
Top Bottom