Off we go again ....

B

Beedub

Lifer
 Sutton Coldfield
Weight savings ahoy.....

Don't suppose anyone has a spare BMW Z4 occupancy mat do they 😁
 

Attachments

  • 20200422_122412.jpg
    20200422_122412.jpg
    245.3 KB · Views: 1,516
Beedub said:
Weight savings ahoy.....

Don't suppose anyone has a spare BMW Z4 occupancy mat do they 😁
Click to expand...

Looking good! 8)

I think you can get emulators if your stuck finding a gen mat
 
RedUn said:
Beedub said:
Weight savings ahoy.....

Don't suppose anyone has a spare BMW Z4 occupancy mat do they 😁
Click to expand...

Looking good! 8)

I think you can get emulators if your stuck finding a gen mat
Click to expand...

i ended up just buying an emulator for 30 quid.... from what i saw theirs lots of different variants of plugs etc... will try and get these installed within two weeks!
 
Vanne said:
Awesome!!! love the seats. very very nice. :D

Rollbar install next? :thumbsup:
Click to expand...

Not quite at that stage yet, need to decide what to do with the seats, ive tried they fowl the door cards, not by much but i think over time the rubbing will damage the seat and the door card which is unacceptable to me..... so i may need to stick with the tillet B5 idea. insane really as they were designed for narrow cockpits ( lotus elise specifically ) shame as they would have been a really nice addition to the car. For e46 these would be bang on!
 
The Elise/Exige seats are inset towards the middle of the car by the huge door cills, so they can can afford to be broader than you’d expect. Those seats do look great though, it’s a shame...
A0316436-F26D-4737-BFC3-7436B6DA77DE.jpeg
 
BMWZ4MC said:
The Elise/Exige seats are inset towards the middle of the car by the huge door cills, so they can can afford to be broader than you’d expect. Those seats do look great though, it’s a shame...
A0316436-F26D-4737-BFC3-7436B6DA77DE.jpeg
Click to expand...

agreed! such a shame as they are nearly new and theirs no point damaging the seats or the car fitting them as i do intend to get back to the track, it will cause lots of damage quickly, i could mod the one shoulder but again seems a shame to mess with otherwise perfects seats.

At this point my only option is the tillet B5 but new these are thousands, which at the moment is too rich for me.
 
Beedub said:
BMWZ4MC said:
The Elise/Exige seats are inset towards the middle of the car by the huge door cills, so they can can afford to be broader than you’d expect. Those seats do look great though, it’s a shame...
A0316436-F26D-4737-BFC3-7436B6DA77DE.jpeg
Click to expand...

agreed! such a shame as they are nearly new and theirs no point damaging the seats or the car fitting them as i do intend to get back to the track, it will cause lots of damage quickly, i could mod the one shoulder but again seems a shame to mess with otherwise perfects seats.

At this point my only option is the tillet B5 but new these are thousands, which at the moment is too rich for me.
Click to expand...

Slimmer carbon door cards Byron..? Assuming you can get them of course...
 
Yeah, sigh, its known that they foul the doors.. only by a little, but as you said, time after rubbing will cause damage. is it at all possible to move the seats closer to the tranny tunnel?
 
On the seat front, I have the same width problem on the sprite. I use a Sparco Sprint which are among the narrowest I've found at shoulder level. Can be bottom or side mounted.
 
john-e89 said:
Beedub said:
BMWZ4MC said:
The Elise/Exige seats are inset towards the middle of the car by the huge door cills, so they can can afford to be broader than you’d expect. Those seats do look great though, it’s a shame...
A0316436-F26D-4737-BFC3-7436B6DA77DE.jpeg
Click to expand...

agreed! such a shame as they are nearly new and theirs no point damaging the seats or the car fitting them as i do intend to get back to the track, it will cause lots of damage quickly, i could mod the one shoulder but again seems a shame to mess with otherwise perfects seats.

At this point my only option is the tillet B5 but new these are thousands, which at the moment is too rich for me.
Click to expand...

Slimmer carbon door cards Byron..? Assuming you can get them of course...
Click to expand...

i want to try and keep the stock door cards and general interior.....
 
You must log in or register to reply here.
Back
Top Bottom