OEM Z4 chrome exhaust tips - FREE

R

Richattwood88

Member
Greg81 was kind enough to send these through to me for free, unfortunelty they do not fit my car (2007 2.5si sport) therefore I am offering them up for free. I believe from talking to Greg81 they will fit the pre facelift Z4 2.5.

I can get the dimensions this evening if that would help anyone.
 

Attachments

  • IMG_8801.JPG
    IMG_8801.JPG
    277.9 KB · Views: 1,252
  • IMG_8802.JPG
    IMG_8802.JPG
    266.2 KB · Views: 1,252
  • IMG_8803.PNG
    IMG_8803.PNG
    1 MB · Views: 1,252
Do you know if these would fit a pre-facelift 3.0 as well?

I've been looking for some but it's hard to come across them
 
Just had a look, it's fairly difficult to measure the dimension as there are grooves that help attach the tip to the exhaust. It looks about 55mm from groove to groove to me but I could be wrong.
 

Attachments

  • IMG_8862.JPG
    IMG_8862.JPG
    312.2 KB · Views: 1,122
  • IMG_8863.JPG
    IMG_8863.JPG
    286.9 KB · Views: 1,122
  • IMG_8865.JPG
    IMG_8865.JPG
    249.3 KB · Views: 1,122
I can confirm that these will NOT fit the 3.0. these are for pre facelift 2.2/2.5 only
 
Richattwood88 said:
Just had a look, it's fairly difficult to measure the dimension as there are grooves that help attach the tip to the exhaust. It looks about 55mm from groove to groove to me but I could be wrong.
Click to expand...

The pipes on the pre facelifts are oval, not round, hence the grooves.

Mike
 
Kallum9 said:
Thanks for the info greg. Sorry rich, seems they wont fit my car :/

Maybe next time :)
Click to expand...

I'm in the same situation as you and had to learn all about the sizes recently. I changed my backbox and and was sent a different size so unfortunately having to hunt for a new set hence these going up for free. Good luck finding some, I'm having no end of trouble sadly :(
 
My daily has the same M54 in 2.5 format as a pre-facelift, so I just shot out and measured the tailpipes - sadly they're 60mm external diameter. :(
 
Mr Tidy said:
My daily has the same M54 in 2.5 format as a pre-facelift, so I just shot out and measured the tailpipes - sadly they're 60mm external diameter. :(
Click to expand...

Are your pipes not oval?

These photos are from the exact box these tips came off. If your pipes are the same you're good to go...
 

Attachments

  • IMG_20170906_203301346.jpg
    IMG_20170906_203301346.jpg
    104.8 KB · Views: 576
  • IMG_20170906_203311050.jpg
    IMG_20170906_203311050.jpg
    93 KB · Views: 576
You must log in or register to reply here.
Back
Top Bottom