OEM wind deflector found from Usel

RMB

Senior member
 Bournemouth
Site Supporter
Not sure if a retro fit is possible but needing a wind deflector as my new zed doesn’t have one.
Any help, links and guidance much appreciated.
Thanks
 
Does anyone know if I get this kit if I need new hoop trim or anything else?
Thanks
 
I have a complete kit for sale, everything you need for £200 delivered. You need to change the front half of the hoops because they have holes in for the brackets to fit.

You can remove your front hoops and drill out the holes as they are marked on the inside of where to drill.
 
Great. Would you be able to send me some pictures please?
 
All the broken bits have pointy arrows, whilst this may seem a lot of broken clips I would challenge you to remove it after fitting it

The 2 rear halves of the roll over hoops have marks from where a roof has passed over them. These two pieces are the ones that don't have the holes or indents for the wind deflector so you could use your two current rear halves if they are in better condition. There is only one broken clip on the front half of the hoop cover with the holes for the bracket. There are no broken clips of the other front half.

20240420_150707.jpg

20240420_150833.jpg

20240420_150827.jpg

20240420_150812.jpg

20240420_150807.jpg

20240420_151703.jpg

The main wind deflector is in perfect condition.
 

Attachments

  • 20240420_151647.jpg
    20240420_151647.jpg
    133.3 KB · Views: 367
Thanks for this, leave this with me but definitely interested.
Now if you have some alloys too that would be incredible! 👍🏻
 
Thanks Usel, damn I missed the ebay one. Been cleaning the zed and then out in it.
Could I just buy those 3 mesh grills and 2 pairs of brackets like in that ad, using my existing hoops and a drill?😬
 
Yes you could, you would need to remove the front half of the hoop cover. The front half is the piece that comes off first. There is a circle marked on the inside where you should drill.

Just be aware, that ebay ad I listed didn't appear to include the screw and screw covers. Which are quite expensive.

https://www.lllparts.co.uk/catalogs/bmw/ECE/e85/z4+3.0i/r||2004|01|search/54/54_0314

£6.46 per screw and £2.50 for a plastic cover! This is each!

No idea where you would source the boot screws and the plastic wall plug type doodah. The boot screws are shorter.

You could use screws from b&q but I don't know what pitch the thread is.
 
Ok thanks Usel. You’ve been very helpful. Sounds a bit confusing with all the screws etc, so maybe better to get your full set.
Will you take £175 delivered please? 😊
 
Just wanted to say a big thanks to Usel (Rob) for the wind deflector kit.
It arrived next day delivery, very well packaged and in great condition.
He helped me with some basics and pointed me to a fitting thread.
After a bit of initial faf getting the old hoops off it’s all done.
Cheers Rob.
 

Attachments

  • image.jpg
    image.jpg
    112.6 KB · Views: 183
Back
Top Bottom