Numerous BMW Badges

IAmOrion

Senior member
 Cambridge, UK
I have some BMW Badges that I no longer need. Can be sold as sets, or sold separately. All prices INCLUDE POSTAGE

1st up are these 82mm Badges. I have 4 available. Never been used, has black sticky foam on the back, and a protective film on the front.

SOLD

IMG_0196.jpg
IMG_0197.jpg
IMG_0198.jpg

2 x 68mm Wheel Center Caps with badges. These are as new, never used. £8 for the pair

IMG_0199.jpg

USED Black & White Carbon Fibre Set: 3 x 82mm (2 side roundels + boot), 4 x 68mm wheel center caps, 74mm (Bonnet), and a Steering Wheel badge. The steering wheel badge has lost its backing and is sticky hence why it's in a bag. £15

IMG_0204.jpg
IMG_0200.jpg
IMG_0201.jpg

One of the center caps was slightly scuffed/scratched from removal, the remaining 3 are IMO pretty much perfect.

IMG_0202.jpg
(with flash)

IMG_0203.jpg
(without flash)

As always, welcome to send offers. :thumbsup:
 

Attachments

  • IMG_0195.jpg
    IMG_0195.jpg
    244.3 KB · Views: 1,176
IAmOrion said:
I have some BMW Badges that I no longer need. Can be sold as sets, or sold separately. All prices INCLUDE POSTAGE

1st up are these 82mm Badges. I have 4 available. Never been used, has black sticky foam on the back, and a protective film on the front.

£6 each / offers

IMG_0196.jpg
IMG_0197.jpg
IMG_0198.jpg

2 x 68mm Wheel Center Caps with badges. These are as new, never used. £8 for the pair

IMG_0199.jpg

USED Black & White Carbon Fibre Set: 3 x 82mm (2 side roundels + boot), 4 x 68mm wheel center caps, 72mm (Bonnet), and a Steering Wheel badge. The steering wheel badge has lost its backing and is sticky hence why it's in a bag. £15

IMG_0204.jpg
IMG_0200.jpg
IMG_0201.jpg

One of the center caps was slightly scuffed/scratched from removal, the remaining 3 are IMO pretty much perfect.

IMG_0202.jpg
(with flash)

IMG_0203.jpg
(without flash)

As always, welcome to send offers. :thumbsup:

Remind me again, Are the 82mm badges for the e85 bonnet? I forgot their weird size! If so I’ll take one :)
 
RyanB88 said:
Remind me again, Are the 82mm badges for the e85 bonnet? I forgot their weird size! If so I’ll take one :)

Well, MY E85 was 72/74mm from memory. The 82mm fits the BOOT but is too big for the bonnet. Not sure if that just the pre facelift (Mine's 2003) so I can't give a definite answer... maybe someone with greater knowledge may chip in with sizes :)
 
IAmOrion said:
1st up are these 82mm Badges. I have 4 available. Never been used, has black sticky foam on the back, and a protective film on the front.
£6 each / offers
£20 for the four ok? I'll drop you a pm, thanks.
 
Would you accept £10 for the carbon badges? Please PM me!

Edit - Sorry! Just researched and it appears the bonnet badge is meant to be 70mm, so I’ll have to pass!

Regards,
David
 
David said:
Would you accept £10 for the carbon badges? Please PM me!

Edit - Sorry! Just researched and it appears the bonnet badge is meant to be 70mm, so I’ll have to pass!

Regards,
David

No problem. Yes I would’ve taken £10, I’ll measure the bonnet badge shortly and get back to you just in case I got the size wrong. What model is yours? These were fitted perfectly to my 2003 pre facelift
 
IAmOrion said:
What model is yours? These were fitted perfectly to my 2003 pre facelift

Mine’s a 2006 (Facelift) 3.0si.

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F180946799495

As you can see from here, OEM size is 70mm
 
David said:
Mine’s a 2006 (Facelift) 3.0si.

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F180946799495

As you can see from here, OEM size is 70mm

You're absolutely correct. I just realise I never stated that the bonnet badge does NOT have the backing mount piece, so it's just the badge. I've just measured it and the badge itself is 66.5mm +/- a fraction due a to manual measurement with verniers. So that's the right size to fit the 70mm bonnet backing mount. But might be no good to you without that backing plate unless you fancy peeling off the OEM badge and sticking this one in its place.
 
IAmOrion said:
David said:
Mine’s a 2006 (Facelift) 3.0si.

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F180946799495

As you can see from here, OEM size is 70mm

You're absolutely correct. I just realise I never stated that the bonnet badge does NOT have the backing mount piece, so it's just the badge. I've just measured it and the badge itself is 66.5mm +/- a fraction due a to manual measurement with verniers. So that's the right size to fit the 70mm bonnet backing mount. But might be no good to you without that backing plate unless you fancy peeling off the OEM badge and sticking this one in its place.

Too fiddly for me, but thank you for taking the time to find that out. GLWTS :thumbsup:

David
 
Back
Top Bottom