Hello,
So….. The passenger door couldn’t be opened from the outside but still opened from the inside. Today I had a look to see if I could rectify the problem but have made the situation worse, the door no longer opens from the inside. Here is what I did:
1. Took the interior panel partially off to see if the issue was with the Bowden cable
2. Lubed the door mech that hits the striker plate
3. The door mech moved when I used the outside handle
4. Put the door panel back on
5. Tried to shut the door but the door mech wouldn’t activate when the door hit the striker plate. This meant the door remained open
6. Held the door shut and the used the remote to lock the car and the door was then closed
Since then I cannot open the door from the inside, have tried multiple locks/unlocks, windows up/down/partial open but still nothing. So now I have no clue how the heck I get the damned door open, any suggestion?
TIA Paul
****UPDATE****
With a lot of cursing and huffing and puffing, I have managed to get the door panel out in situ. I have removed the boden and trying to release the catch but it is stuck fast. I am now completely at a loss as to next steps and there doesn't seem to be any how to's or you tube videos out there.
So….. The passenger door couldn’t be opened from the outside but still opened from the inside. Today I had a look to see if I could rectify the problem but have made the situation worse, the door no longer opens from the inside. Here is what I did:
1. Took the interior panel partially off to see if the issue was with the Bowden cable
2. Lubed the door mech that hits the striker plate
3. The door mech moved when I used the outside handle
4. Put the door panel back on
5. Tried to shut the door but the door mech wouldn’t activate when the door hit the striker plate. This meant the door remained open
6. Held the door shut and the used the remote to lock the car and the door was then closed
Since then I cannot open the door from the inside, have tried multiple locks/unlocks, windows up/down/partial open but still nothing. So now I have no clue how the heck I get the damned door open, any suggestion?
TIA Paul
****UPDATE****
With a lot of cursing and huffing and puffing, I have managed to get the door panel out in situ. I have removed the boden and trying to release the catch but it is stuck fast. I am now completely at a loss as to next steps and there doesn't seem to be any how to's or you tube videos out there.