no heated rear window

[Microlightstore]

Hi
wonder if anyone can help , a few months ago i had my roof motor moved and fixed,
fantastic i was well happy , got home but the rear window de-mister stopped working
just wondered if anyone had any ideas why this happened i thought he may have
accidentally pulled a wire off , i can go back but looking for suggestions to save me
a 150 mile round trip if its a simple thing , if anyone could point me in the direction
where the connectors may be , it may just be total co incidence that its not working
again if anyone has any ideas it would be great , when i turn it on you can hear the
relay click under the glove box but it does not work.

many thanks in advance

 

[Ducklakeview]

The connector is on the drivers side, and the cable runs up along the roof hinge/ram. Does the button illuminate when you turn it on? You haven't had a flat/replaced battery lately have you?

Mike

 

[thanatu55]

Yeah sounds like it could have gone into 'Transport Mode'

 

[Ducklakeview]

Yeah sounds like it could have gone into 'Transport Mode'

Which is where my questions were leading lol. And check your WhatsApp Jay!

Mike

 

[thanatu55]

Beat you to it Mike it's one of the few times i've been able to provide something possibly helpful to another member lol :wink:

Need to charge my phone sorry I'm useless when it comes to contact with the outside world!

 

[Microlightstore]

Hi
Thanks for the reply yes the button does light up and yes it had a flat battery
Any ideas how I can sort this
Thanks

 

[Ducklakeview]

Ok, one last question. Does the blower motor still work on max speed, or does it sound slower than usual when on full?

Just making sure before I jump in lol.

Mike

 

[Microlightstore]

It sounds normal as far as I am aware

Thanks

 

[Microlightstore]

any other ideas would be helpfull

thanks

 

[piotrZ4]

Check cables on both sides, mine was broken on the passenger side, most likely from opening/closing roof regularly

 

[HarryD]

My defogger stopped working. I pulled the little covers off of the connector and the right hand one 9the powered end) fell off. I used a defogger tab repair kit to reattach.

If you have a volt-ohm meter, you can do a few simple tests.
1-Remove the cover from the right tab, check for 12 volts between the tab and ground when the defogger is energized. If 12 volts then ok.
2-Remove the left tab cover, and with the power off, use your ohm meter to check that tab for continuity to ground (the meter will read 0 ohms if ok and infinite ohms if broken).

If these are both ok, it should be working ok.

 

[Microlightstore]

How do I know if it’s gone into transport mode and how can I get it out of that if it is ?
Thanks