Newbe ..... Just picked up an 2007 SI roadster

Like the stealth look & i'm a big fan of switching to the M spec tyre sizes but looks like you painted over the rim bolts as well ?
 
mr wilks said:
Like the stealth look & i'm a big fan of switching to the M spec tyre sizes but looks like you painted over the rim bolts as well ?

Yes I had the shop paint the the whole rim together. I had a set of Prius rims down a few years ago and the powder coating job that this shop does is very impressive!
 
Found myself checking the oil in the dark so I made hood lights.

8)
20151018_190024.jpg


Took apart a couple COB led W5W bulbs, soldered them up and bingo!
20151018_171055.jpg
 
Wow. . .like the work you've done on your Zed Matt. :thumbsup: (Upping the side walls to ///M sizes should make the ride a little better as well as looking good :thumbsup: )

Like the under hood (we call it the bonnet over here) light - excellent. (You could say brilliant :lol: )

Just one thing - how about darkening the BMW logos on the indicator and bonnet boot badges? Some owners have replaced them with red and white or black and white, even carbon fibre look alike logos.
 
paulgs1000 said:
Wow. . .like the work you've done on your Zed Matt. :thumbsup: (Upping the side walls to ///M sizes should make the ride a little better as well as looking good :thumbsup: )

Like the under hood (we call it the bonnet over here) light - excellent. (You could say brilliant :lol: )

Just one thing - how about darkening the BMW logos on the indicator and bonnet boot badges? Some owners have replaced them with red and white or black and white, even carbon fibre look alike logos.

I like the idea of darkening the emblems but decided its time to curb the spending a bit. I ordered SS brake lines, CDV delete, M-series steering wheel. All ready added the alarm (and dealer charged $200 to program it), half cover and so on.....

Before you know it, it will be $10+k in mods, thats how my super charged 4x4 Toyota Tacoma went anyway. :?
 
mattgecko said:
Thanks!




I test drove an 07 M coupe and found I my knees against the dash. In the roadster (non M) I have a few inches to spare and its doable.

Do the coupes have less leg room or are the M seats bigger / thicker?

I'm 6'6" in case your wondering.

Hi Matt - your car looks mean in black ! Good to see someone of normal height ( I'm the same plus an inch :cry: )

Welcome
 
Thanks! Its funny to see peoples reaction when we get out of that tiny car.

Do you have the M seats and is your Z a roadster? Still wondering if the M seats will reduce our leg room.
 
Yes have M seats - it's a roadster - my first zed was also a roadster but with normal seats - I do think the M seats have less room !

I know what you mean about the "looks " you get climbing in and out of the car - it's an art ! You describe it as "tiny " but over here it's a lot bigger than the usual MGF's and MX5's - over there I presume you have a lot of big muscle American sports cars.
 
mattgecko said:
Found myself checking the oil in the dark so I made hood lights.

The lights are excellent, although I fear you'll more than lighting to check the oil, as the 3.0si doesn't have a dipstick. I spent 15 minutes looking for mine. :rofl:

Welcome along and the zed looks :thumbsup:
 
gov said:
Yes have M seats - it's a roadster - my first zed was also a roadster but with normal seats - I do think the M seats have less room !

I know what you mean about the "looks " you get climbing in and out of the car - it's an art ! You describe it as "tiny " but over here it's a lot bigger than the usual MGF's and MX5's - over there I presume you have a lot of big muscle American sports cars.


Yes we have a lot of big vehicles over here, you have to drive in like a race car or you get cut off non stop.

Thanks for confirming the M-seats, I'm to long legged for the M-seats. Very disappointing!




stuartC said:
mattgecko said:
Found myself checking the oil in the dark so I made hood lights.

The lights are excellent, although I fear you'll more than lighting to check the oil, as the 3.0si doesn't have a dipstick. I spent 15 minutes looking for mine. :rofl:

Welcome along and the zed looks :thumbsup:


Who makes a car without a dip stick?? so frustrating having to go inside the car and wait for the car to give me a reading, then come back and add more oil. I added 7 qts and it still showed a little low that day, few days later it showed it was correct.

O-well the free DIY mod came a lot brighter than I expected!
 
I note you said 'half cover' matt - be careful. There has been much posted about heavy half covers scratching the paintwork when used. My mate's black Zed was terribly marked by such a cover. I've had three types of half covers and stopped using the two heavier (proofed fabric) types due to them hazing and scratching the paint. I now only use a light plastic type. You can do a search and read more on the forum.
 
paulgs1000 said:
I note you said 'half cover' matt - be careful. There has been much posted about heavy half covers scratching the paintwork when used. My mate's black Zed was terribly marked by such a cover. I've had three types of half covers and stopped using the two heavier (proofed fabric) types due to them hazing and scratching the paint. I now only use a light plastic type. You can do a search and read more on the forum.

I was about to pull the trigger on a heavy cover but Marlon saved me and my paint. He recommended the classicadditions.com half cover.
 
mattgecko said:
paulgs1000 said:
I note you said 'half cover' matt - be careful. There has been much posted about heavy half covers scratching the paintwork when used. My mate's black Zed was terribly marked by such a cover. I've had three types of half covers and stopped using the two heavier (proofed fabric) types due to them hazing and scratching the paint. I now only use a light plastic type. You can do a search and read more on the forum.

I was about to pull the trigger on a heavy cover but Marlon saved me and my paint. He recommended the classicadditions.com half cover.

Wise man :D :thumbsup:
 
Project Bike rack:
After a bunch of research on the net, I picked up a 2" to 1 1/4" hitch adapter and created this sculpture.

The "rabbit ears" bolt to the steel bumper.
20160403_171833SM.jpg

Very please with how it came out, the hitch sits tight up against the bumper cover and a ways back.

20160403_171850sm.jpg
20160403_123922.jpg
 
Waited 2 months for a slow boat from Japan, finally have my new shoes!

Advan RZ-DF Mat Black
18x8.5 offset 35
18x9.5 offset 35


20170304_080215.jpg
 
Well worth the wait - Notice the yellow reflectors have gone, really liking the 'stealth' look on this Zed :thumbsup:
 
Thanks! Yes I installed the white reflectors and found them to be to bright so I added some static cling tint. Did the side blinker emblems also. :)

Nice weight reduction with the Advans VS the oem Style #108 rims.
 
Back
Top Bottom