Hi,
Posted in the problems forum (http://www.z4-forum.com/forum/viewtopic.php?f=3&t=13487&start=0) about DSC warning lights on the dash, it appears I have a binding caliper which, when described to BMW service, is probably causing the wheel speed sensor to get 'confused' and throw up the warning lights. There's lots of dust no on the front offside wheel and the disk is burning hot. I'm going to try and free up the caliper but have been told to just replace or suck and see with new pads (obviously this involves pushing the piston back). Pads have a fair amount of material left though the wheel in question appears lower.
OK, the worst news is the wheel sensor may be away also, even worse the control servo unit, either way I'm looking at £££££££££'s
Any thoughts guys?
Posted in the problems forum (http://www.z4-forum.com/forum/viewtopic.php?f=3&t=13487&start=0) about DSC warning lights on the dash, it appears I have a binding caliper which, when described to BMW service, is probably causing the wheel speed sensor to get 'confused' and throw up the warning lights. There's lots of dust no on the front offside wheel and the disk is burning hot. I'm going to try and free up the caliper but have been told to just replace or suck and see with new pads (obviously this involves pushing the piston back). Pads have a fair amount of material left though the wheel in question appears lower.
OK, the worst news is the wheel sensor may be away also, even worse the control servo unit, either way I'm looking at £££££££££'s
Any thoughts guys?