Nearside Headlight face lift halogen

I have a headlight with silver inner surround but going by your pic you need black
 
Does it need to be perfect condition or one you intend on butchering? I've got this one in my shed, bought it to use the innards and never got around to it. It's missing the top left mounting bracket and there are some scuffs/scratches on the lens which may come out with some sanding, although I can't guarantee that. I'd give it a go myself but I can't find my headlight sanding kit.

sketch-1615485133395.png
_20210311_175051.JPG
_20210311_175123.JPG
_20210311_175105.JPG
_20210311_175140.JPG
_20210311_175024.JPG
_20210311_175336.JPG
 
I’ve dropped a blob here mate. It’s the near side I need not the offside. It would have been perfect too. I need one because during my latest headlight overhaul I dropped the bloody thing and broke the bracket that the rear cover tucks into. Sorry bud
 
If you still have the broken bits, use a soldering iron to plastic weld them back on. I do this a lot repairing bumpers.
 
I do. I fashioned a metal bracket so hopefully it will hold but I’m preparing for the worst. Only time and wet weather will tell. Cheers tho :thumbsup:
 
[ref]Nash3vans[/ref], I purchased a plastic welder and managed to do a full repair. Really impressed with the results. Even managed to repair the side under trays that connect to the bumper.

This is the product. Highly recommended.

Sealey SDL14 50W Lithium-Ion Rechargeable Plastic Welding Repair Kit https://www.amazon.co.uk/dp/B08915QCJR/ref=cm_sw_r_cp_api_fabc_XFBX9P97X04SVD6PX2P4
 
Be interested to see a write up? Or pics? One of my headlights has a crack like this :(
 
I will take the light off to show my work and that should show the problem I had.

Just wish I had known this procedure and technique as I could have saved so much in the past. Every day is a school day😎👍
 
You must log in or register to reply here.
Back
Top Bottom