N52 VANOS solenoid choice

S

smorris_12

Senior member
 Somerset
Yesterday I found a recent error code for the VANOS solenoid on the exhaust side which has migrated from the inlet side after I swapped them over a few months ago. I did give it a clean and wash thru with brake cleaner at the time but it's still not been quite right, so time for a new one.

It's 41% day at the bloody awful autodoc but since I'm not in a hurry[1] I'll probably use them and I get my choice of makes.

So, has anyone got any experience of non-Pierburg solenoids? There's Febi or Gates, both at far better prices (£50 vs £85) or FAI at £70. Or the selection of no-name stuff.

Anyone bought non-Pierburg and lived with them for a long and happy time?



[1] Had a basinful of slowness with them lately
 
Well, for good or for ill, I panic bought a Febi as the 41% finished at 4pm. To be replaced by the 43% one.

D'oh.
 
How did it work out....... needing to buy the same, struggle to find something in the UK...... Looks like 300 for BMW and 120-170 for a pair of Febi or Pierburg
 
Cor, I'd forgotten all about this. Well, 7 months and about 5k miles later, the car's not exploded. It's certainly running ok although I've not read the ECU for errors. This is a win as far as I'm concerned.

To my mind, other brand parts are either wrong from the get-go (they literally won't fit, are calibrated wrong, etc) or are fine. The lifespan for branded components oughtn't to be worse than OEM and I've rarely found anything that doesn't do a few years happily. I've had all sorts of Febi stuff over the years and don't recall replacing any in short order. It's only really the Chinesium stuff that's beyond the pale more often than not - a friend bought a set of very cheap tie rod ends and the rubber gaiters had given up in 6 months.

So, I'm pleased with saving the thick end of £100 (that should curse things!)
 
Anyone knows is Pierburg OE manufactorer to BMW OEM solenoids? Here Febi is 70€/pcs and Pierburg 99€/pcs (OEM ones directly from BMW 200€/pcs).

Thats be 29€ difference is this prices are quite narrow, if Pierburg is OE manufactorer to this solenoids.
 
I just received my new VANOS Solenoids - Pierburg, labelled as manufactured in China (country of manufacture was not specified on line)

Any experience ? They were more expensive than most of the other brands offered, though definitely less than BMW. I know there are Chinese component manufacturers with good quality control. It just gets very tricky following who really sells quality and who does not. I am replacing because of age and mileage, not failure, yet. I try to balance over-spending with not running anything to failure if I can help it. I'll hit 100K this Spring or Summer.
 
You must log in or register to reply here.
Back
Top Bottom