N/S side light not working

[peteinnit]

Hi all,
The circular side light is not working on one side only, I have tried a new bulb but the problem persists, the headlight and beam work fine. I thought about a fuse, but I'd be surprised if there was separate fuse for each side light, I will check though. Wondering if anyone else has had the same problem and found a fix? I'm really hoping it isn't a wiring problem! I've a '62 plate E89.

Any advice greatly appreciated.

Cheers,
Peter

 

[Chippie]

You could try swapping the bulbs from side to side to double check its definitely not the bulb

 

[peteinnit]

Will do that in the morning

 

[B21]

Hi all,
The circular side light is not working on one side only, I have tried a new bulb but the problem persists, the headlight and beam work fine. I thought about a fuse, but I'd be surprised if there was separate fuse for each side light, I will check though. Wondering if anyone else has had the same problem and found a fix? I'm really hoping it isn't a wiring problem! I've a '62 plate E89.

Any advice greatly appreciated.

Cheers,
Peter

Common fuse through the FRM so unlikely to be a fuse…check grounding..

 

[peteinnit]

Well it's definitely not the bulb :x

Couldn't find the ground, but it's pretty tight in there so couldn't see much of anything. Guessing I need to remove the whole headlamp unit and or some panels to find where it is, any clues would be appreciated.

Thanks

 

[flybobbie]

So do you get bulb out warning before or after you remove the bulb.

Remove wheel arch liner and can unplug main connector into unit and use contact cleaner.

 

[peteinnit]

Bulb out warning light came on with bulb in place. It was intermittent for a couple of days. When it first came on I checked the lights and all were working, when it came on a second time the side light wasn't working. The sidelight was then intermittent for a day before stopping altogether. I'll take the wheel liner off and have a look. Thanks.

 

[B21]

Beware the FRM module acts as a resettable fuse system up to a point ..then it permanently blocks the circuit…a decent BMW specific code reader is your friend here..as it is on so so many issues on E89s…

 

[peteinnit]

All sorted, gave everything a good clean, living by the seaside has been a bit detrimental. Thanks for all the tips. Cheers

 

[Chippie]

That’s a great result