My z4

The arch liner still in place, only rubbing on full lock witch is fine for me

Sent from my LT18i using Tapatalk 2
 
And you've done nothing to modify it at all?! Wow! It must be the tyre figment cos my fronts (before i modded the liner and bumper) when turned slightly in so the outside edge of the tyre is close to the back end of the bumper and liner I had maybe 5mm clearance so if i rolled over anything larger than a pebble it rubbed!
I'll see if I can find some pics of what was happening and the gap that was there :)
 
all i did it's fitted arch liner inside the bumper, usually it goes on top of it ,and don't forget you have got different offset and tyres too
 
I had to do that too with mine to sort it.
I know offsets are different but they look very similarly 'flush' with the arch on the front. That's Great though you get no rubbing! I may have to look at smaller tyres on my fronts! :thumbsup:
 
Nice Marius :thumbsup:

Hardly any snow here yet :x

Did you tint your windows, or were they always like that ?
 
Marius said:
all i did it's fitted arch liner inside the bumper, usually it goes on top of it ,and don't forget you have got different offset and tyres too

Marius said:
all i did it's fitted arch liner inside the bumper, usually it goes on top of it ,and don't forget you have got different offset and tyres too

Did you have to cut any of the liner in order to put it behind the bumper? Had a go at putting mine behind the bumper but the section where bumper meets front wing wouldn't fit unless I were to trim it a bit. Gave up in the end, raised the car a few mm and used some cable ties to adjust the liner a fraction.
 
abit of sideways action :D

clipboard01pax.jpg


clipboard011va.jpg
 
Machine monkey said:
Great pics nice driving :thumbsup: I am sure it was safe....

Road was closed, so I guess it's considered as safe, these are screen shots from the video

btw car was running on super fuel :lol: :lol: :lol:

redbullh.jpg
 
Back
Top Bottom