WANTED Msport seats - any colour

Wanted

Alemito

Member
 Milano, Italy
Bit of a different post here:

in the middle of next august, I'll take my trusty little Z, and from Italy I'll come to the UK.
More on that later, but I'd like to meet some fellow Z enthusiasts.

I would also like to get the chance and come collect a pair of *manual and heated* Msport seats.
Any colour is good really.

I know it's a bit early as of April, but I'm starting to arrange my trip.
And if any of you would like to sell their seats to an Italian fella, I'd be thrilled to add a few stops to my trip.

Let me know if you have something worth waiting a couple of months!

Cheers everyone

Alessandro
 
Ciao, what type of Z4 E85/86 or E89?
Uh, yeah, sorry


This guy:

zeta.jpg

2004 2.5i M54
6-speed swapped from a 3.0si
3.0i clutch kit
Clutch delay valve deleted
3.0si full driveshaft
OEM stainless steel clutch arm pivot
Hydraulic power steering
LF-20 pump (110 bar)
Larger N52 power steering pulley (lower pump RPMs = less power steering assistance)
091 steering rack from a 2.8i Z3 E36
3.0i full brake setup (6 pot waiting on the garage floor...)
Braided steel brake lines
X1 E84 staggered style 322 wheels (8J ET30/9J ET41)
*Every* bushing is PU 92sha, no rubber left underneath. Yes, even the shift arm linkage bushes are PU!
3-point front strut brace
Eibach -50mm lowering springs on custom-modified OEM shock absorbers
CNC machined adjustable rear lower arms, for camber setup
Camber plates up front
Soon-to-be-fitted Toyo R888R semi slick tyres
Genuine ALPINA instrument cluster

Hopefully, I'll have my front M bumper and aero spoiler fitted by august! Back M bumper is already on, full exhaust due next week.
But it's still missing M seats... until august I hope!
 
Last edited:
Uh, yeah, sorry


This guy:

View attachment 293343

Hopefully I'll have my front M bumper and aero spoiler fitted by august! Back M bumper is already on, full exhaust due next week.

2004 2.5i M54
6-speed swapped from a 3.0si
Hydraulic power steering
Z3 091 steering rack
3.0i full brake setup (6 pot waiting on the garage floor...)
X1 E84 staggered style 322 wheels (8J ET30/9J ET41)
Suspension-wise, it's FAR from stock!
nice looking car :thumbsup:
 
I have two colour options, black or black and grey that I can likely have ready by August. The grey/black ones come with the grey door inserts. Both are manual and heated.

Also I'm sure between myself and enuff_zed we can fill your car up with other goodies for you to take home as I know you're always looking for parts 😁

Location is near Norwich.
 
I have two colour options, black or black and grey that I can likely have ready by August. The grey/black ones come with the grey door inserts. Both are manual and heated.

Also I'm sure between myself and enuff_zed we can fill your car up with other goodies for you to take home as I know you're always looking for parts 😁

Location is near Norwich.
As long as I have money left, I'll happily fill it up to the brim!

Black over black/grey for me, or whichever cost less :p

Ideally I'd like to make my interior champagne beige, but I still like my current black interior.

Where are you mates based?
 
We are near Norwich in East Anglia.

Champagne seats and door cards in a black interior looks amazing imo. If you can find the seats then you can always paint the door cards.

Seats will be £600 for either colour pair. Will post pictures once I have sorted them.

If you find seats with someone else in another colour or cheaper then it won't bother me as they are easy to move on 👍
 
We are near Norwich in East Anglia.

Champagne seats and door cards in a black interior looks amazing imo. If you can find the seats then you can always paint the door cards.

Seats will be £600 for either colour pair. Will post pictures once I have sorted them.

If you find seats with someone else in another colour or cheaper then it won't bother me as they are easy to move on 👍
Alright, thank you!!!
Yes I can easily dye leather. I have already done a full interior dye on my E61 landyacht hehe

I'll pin your place to my google map!
 
 
Thank you!
Saved, but... non heated sadly. Heating is a non-negotiable!
 
Bit of a different post here:

in the middle of next august, I'll take my trusty little Z, and from Italy I'll come to the UK.
More on that later, but I'd like to meet some fellow Z enthusiasts.

I would also like to get the chance and come collect a pair of *manual and heated* Msport seats.
Any colour is good really.

I know it's a bit early as of April, but I'm starting to arrange my trip.
And if any of you would like to sell their seats to an Italian fella, I'd be thrilled to add a few stops to my trip.

Let me know if you have something worth waiting a couple of months!

Cheers everyone

Alessandro
@Cv6benplus . Ben usually has some seats available too, sure he has a nice set of heated red electric, as your car is LHD, if you bought RHD electric , you only need to add on can wire to the plug and you could have electric memory both sides too. Ben also knows how to do this .
 
Last edited:
@Cv6benplus . Ben usually has some seats available, as your car is LHD, if you bought RHD electric , you only need to add on can wire to the plug and you could have electric memory both sides too. Ben also knows how to do this .
Thank you! Let's wait for Ben then!

Thank you so much for your suggestions for memory seats! As far as modifications go, believe me, I know my way very well :ROFLMAO:
I already have a LHD driver side memory console and motors with position control ready for dual memory seats.
But in reality I'd like to have manual seats tho, because they sit lower than power seats.
 
Bit of a different post here:

in the middle of next august, I'll take my trusty little Z, and from Italy I'll come to the UK.
More on that later, but I'd like to meet some fellow Z enthusiasts.

I would also like to get the chance and come collect a pair of *manual and heated* Msport seats.
Any colour is good really.

I know it's a bit early as of April, but I'm starting to arrange my trip.
And if any of you would like to sell their seats to an Italian fella, I'd be thrilled to add a few stops to my trip.

Let me know if you have something worth waiting a couple of months!

Cheers everyone

Alessandro

I also have these red ones. Heated and electric but I can easily swap them onto manual bases. Occupancy both variants of occupancy sensor are currently in the left hand seat with the prefacelift on an emulator but this can be swapped over to the other side easily enough for European LHD cars.

I also can offer to help fill your car with parts.
I'd also be interested if you could bring some Euro LHD parts over for me if you can source them?

1000042238.jpg
 
I also have these red ones. Heated and electric but I can easily swap them onto manual bases. Occupancy both variants of occupancy sensor are currently in the left hand seat with the prefacelift on an emulator but this can be swapped over to the other side easily enough for European LHD cars.

I also can offer to help fill your car with parts.
I'd also be interested if you could bring some Euro LHD parts over for me if you can source them?

View attachment 293348
What a beauty.

I'm not concerned with occupancy sensor anyway, because I coded it out already and to me it's only a nuisance.

I'd be more than happy to help you with LHD parts! What would you need?
 
What a beauty.

I'm not concerned with occupancy sensor anyway, because I coded it out already and to me it's only a nuisance.

I'd be more than happy to help you with LHD parts! What would you need?
If I can remove the occupancy sensors all together as I can reuse them if you don't have the requirement for them.

I'd be looking for LHD electric seat switch panels. Would also consider the motors and loom off the base as well if possible but not essential. I would not need the bases as they would be too cumbersome to transport.
 
If I can remove the occupancy sensors all together as I can reuse them if you don't have the requirement for them.

I'd be looking for LHD electric seat switch panels. Would also consider the motors and loom off the base as well if possible but not essential. I would not need the bases as they would be too cumbersome to transport.
aha! i have a complete set!

seat switch panel w/ memories, full set of motors with position control, MAYBE wiring i don't remember right now I'll have to check!

maybe we can arrange a deal.

check facebook messenger when you get the chance please!
 
Back
Top Bottom