Scottish Borders
So I connected up the reverse camera cable to Mr 12 Volt
Did the latest revs of firmware / software
Today system test
First of all the previous front camera didn't work
No rear camera
Twiddling with the Mr !2 Volt set up ticking the right hand camera button allowed the front camera to come on when putting into drive and then going off at the prescribed time..
But no rear camera..
I get the normal PDC graphic on screen in the normal way.
The camera itself is working (there are two in the rear bumper..one feeds the ID4Motion digital cluster)
I swapped over (in the boot) the two camera feeds where they join the extension cables and the ID4Motion gets a feed from the second camera.
So..either..there's some weird sh!t going on.. or have I not 'toggled' sumfink or..is it simply the feed from the camera into the Mr 12 Volt box has come adrift when I put it all back together?
Did the latest revs of firmware / software
Today system test
First of all the previous front camera didn't work
No rear camera
Twiddling with the Mr !2 Volt set up ticking the right hand camera button allowed the front camera to come on when putting into drive and then going off at the prescribed time..
But no rear camera..
I get the normal PDC graphic on screen in the normal way.
The camera itself is working (there are two in the rear bumper..one feeds the ID4Motion digital cluster)
I swapped over (in the boot) the two camera feeds where they join the extension cables and the ID4Motion gets a feed from the second camera.
So..either..there's some weird sh!t going on.. or have I not 'toggled' sumfink or..is it simply the feed from the camera into the Mr 12 Volt box has come adrift when I put it all back together?