More money?!?!

P

Popey

Senior member
So it would appear the subs behind both seats have stopped working. I have the DSP system and everything else seems to be working fine. It used to feel like a punch in the back, now nothing. Sound is still ok just no pumping bass. (I've checked settings and eq)

I'm going to put it off till after my road trip as I'm guessing it won't be a cheep fix?
 
All other speakers are working ok, maybe its the drivers?

I would of thought if the amp went all channels would go?
 
strange that they've both gone..... before replacing id be doing some investigation work..
the s**t storm comes in 3s!! you've got 1 left...
 
Front reg mount came off when I fitted GB plates, so this is number 3.

No bad luck on my road trip please!
 
whats under the front bumper plate plinth....

i was thinking about removing it and using a sticker for the front Reg number.
 
Beedub said:
whats under the front bumper plate plinth....
Click to expand...
The bumper... :?

Beedub said:
i was thinking about removing it and using a sticker for the front Reg number.
Click to expand...
If you remove the plinth it'll leave screw holes that'll need filling & repainting - although with a sticker you might get away with jst filling if the sticker plate would cover them
 
Beedub said:
whats under the front bumper plate plinth....

i was thinking about removing it and using a sticker for the front Reg number.
Click to expand...
About 5 screw holes.. had mine filled in when I got it resprayed.
 
I put a carbon surround holder on mine and ditched the ugly plinth, looks way better.
 
DanStarr said:
Beedub said:
whats under the front bumper plate plinth....

i was thinking about removing it and using a sticker for the front Reg number.
Click to expand...
About 5 screw holes.. had mine filled in when I got it resprayed.
Click to expand...


thats what i was after :thumbsup: :thumbsup: :thumbsup: ill do the same and use a smaller sticker for the plate.
 
Beedub said:
DanStarr said:
Beedub said:
whats under the front bumper plate plinth....

i was thinking about removing it and using a sticker for the front Reg number.
Click to expand...
About 5 screw holes.. had mine filled in when I got it resprayed.
Click to expand...


thats what i was after :thumbsup: :thumbsup: :thumbsup: ill do the same and use a smaller sticker for the plate.
Click to expand...
If I remember right it's 2 far right and left one in the centre. I ditched the holder looks so much better!
 
Beedub said:
you guys thats got rid can you post some pics please.
Click to expand...
http://www.z4-forum.com/forum/viewtopic.php?f=2&t=86314&start=45

Page three shows the holes I had on my bumper. And what I ended up with near the end on page 3 still.
 
DanStarr said:
Beedub said:
you guys thats got rid can you post some pics please.
Click to expand...
http://www.z4-forum.com/forum/viewtopic.php?f=2&t=86314&start=45

Page three shows the holes I had on my bumper. And what I ended up with near the end on page 3 still.
Click to expand...

And page three of that thread shows mine with the plate held on with earth magnets.

Holes filled when bumper was painted recently, show for shows/pictures plate can be removed in a second, literally.
 
You must log in or register to reply here.
Back
Top Bottom