Mfsw am I just a bit thick?

[Palmer666]

Hi all,

Being a bit silly with my cash I have purchased a MFSW for my 03 3.0 z4. I want to fit it next weekend. Now here comes the issue, throughout my time on here I have looked at walkthroughs but can't see the pictures. Is this something I am doing wrong?

Someone said you can check to see if the wires are there by removing the lower cowling. I can't see the pictures though so if anyone can help me out by explaining how to see if these wires are there.

cheers all

 

[Terryvision]

Don't worry your z'd will have all the internal wiring needed for the controls!

Disconnect the battery, wait 10mins take the air bag off, disconnect the cables, undo the 16mm nut holding the wheel on, put your new wheel on and Connect the control wires to the empty slot on the steering connector

Make sure everything is plugged in before reconnecting the battery!!

Simplest mod ever for a pre facelift car ... http://www.z4-forum.com/forum/viewtopic.php?f=26&t=16422

Ps ignore all the additional wiring from the above link! Just remove the wheel and your see the connections as per step 11 on the link .... SIMPLES!

 

[Palmer666]

Thanks so much. Because I couldn't see the pictures on the how to, I wasn't sure if the wiring would be there. But I had a chance for a cheap m wheel so it had to happen