M Sport MFSW Steering Wheel (E85/86)

Darkangelv2

Senior member
 Southampton
Hi All

I have a decent example of an MSport Steering wheel that’s had the trims all refurbished with Matt primer, paint & clear coat.

Looking for £325 given all examples on eBay look horrendous and start at £250.

Located in Romsey, Hampshire.

Postage will be an extra £15.
 

Attachments

  • IMG_4791.jpeg
    IMG_4791.jpeg
    141.8 KB · Views: 1,087
  • IMG_4793.jpeg
    IMG_4793.jpeg
    139.9 KB · Views: 1,087
  • IMG_4794.jpeg
    IMG_4794.jpeg
    141.2 KB · Views: 1,087
  • IMG_4795.jpeg
    IMG_4795.jpeg
    131.9 KB · Views: 1,087
  • IMG_4796.jpeg
    IMG_4796.jpeg
    137.8 KB · Views: 1,087
  • IMG_4798.jpeg
    IMG_4798.jpeg
    129.8 KB · Views: 1,087
Are you willing to ship/send the steering wheel to Serbia? If you do, I am interested.

PS will my pre facelift airbag work with connectors on M/facelift wheel? And does anyone know if my pre facelift MFSW connectors will work with M/facelift ones?
 
futureZ4buyer said:
Are you willing to ship/send the steering wheel to Serbia? If you do, I am interested.

PS will my pre facelift airbag work with connectors on M/facelift wheel? And does anyone know if my pre facelift MFSW connectors will work with M/facelift ones?

Hi FZ4B

With payment upfront & agreed shipper i'm sure we could get the wheel to you in Belgrade :thumbsup:
 
Hi, that is great! Payment upfront is not a problem. You may be sending the package to London, we will see. Is it okay for you to wait a day or two before I figure out what am I going to do?

Long story short, I am trying to avoid taxes and for example DHL transportation fees because when you add everything up, it will cost too much.
There is a Serbian company that is doing transportation and I have contacted them today. They have some storage in London and then they transfer everything here. For example my friend ordered an OEM media unit that costs 500eur for his Leon Cupra from Netherlands, and in the end everything was 800eur...

Just one more question, are trim clips intact?
 
Umfaan said:
Yes and yes …a straight swap.
As you have MFSW working at the moment.

Thanks for the answer.
Does it matter that my car is LHD? Will that work? I believe it shouldn't be a problem, but better to be on a safe side :D
 
Yes left or right…will work….for reference all cars from 09/2003 come wired for MFSW….if manufactured before that date , it’s only a 2 wire easy modification to allow MFSW to function.
But yours has MFSW at the moment so straight plug and play.
 
Umfaan said:
Yes left or right…will work….for reference all cars from 09/2003 come wired for MFSW….if manufactured before that date , it’s only a 2 wire easy modification to allow MFSW to function.
But yours has MFSW at the moment so straight plug and play.
That is great! Thank you!
 
Do E86’s that do not have a MFSW as standard still have the loom fitted or are there extra components required to fit a MFSW to a standard wheel car? :D
 
All cars ....E85/86 after 09/2003 ...will be Plug and Play for MFSW....to be sure on any Zed... if you remove the steering wheel and lower cowl there is a 10 pin green plug .if there are wires in pin 9 and 10 it will be straight forward plug and Play.If not as on early cars a 2 wire loom with the plug pins attached is available on the internet. This goes from the pins 9/10 to the nearby LCM ...Very straight forward modification ( loom comes with instruction )
 
Umfaan said:
All cars ....E85/86 after 09/2003 ...will be Plug and Play for MFSW....to be sure on any Zed... if you remove the steering wheel and lower cowl there is a 10 pin green plug .if there are wires in pin 9 and 10 it will be straight forward plug and Play.If not as on early cars a 2 wire loom with the plug pins attached is available on the internet. This goes from the pins 9/10 to the nearby LCM ...Very straight forward modification ( loom comes with instruction )
Cheers for your response, appreciated and something learnt. :D
 
Back
Top Bottom