///M Fang Protectors (edit: see first post)

D

dans6490

Active member
Ok, I basically made 15 sets of these but had 16 people that definitely wanted them. I have sent a DM to the 16 that wanted a set but I only have 15 (oops). The fairest way of doing this is by sending the fangs to the first 15 that either reply to the DM I sent yesterday OR send funds. If the 16th person still wants a set, I will add them to the second list (below). I understand this may annoy someone but it's the fairest way I think?

As soon as I have 10 on the second list I will make more.

Members who replied to the DM I sent 28/10/15 OR have paid

1/. Bing
2/. Beng
3/. GWatson
4/. MJ2K
5/. BISH
6/. Cracker
7/. Alfascozzesi
8/. Jingle
9/. Fishydave
10/. gmanlaw
11/. Jimmybell
12/. captainmorgan999
13/. Aarsavage
14/.Andy.c
15/.Hopz121

2nd batch to be made

1/. TomK
2/. TOM
3/. Maxman
4/. Basbas
5/. 99ron
 
Me please - I have a set on that came with the car made by a previous forum member. They're good enough, but they're not quite sat perfectly - and getting a bit tatty from stone chips - so I'd like to try some new ones.

I'll even give you the money now if you like - save you worrying you'll have to use them as dinner table place mats or something :D
 
What do the rpi copies look like? I'm definitely wanting a set!

I need some for mine as my previous fang protectors died a horrible death after hitting a kerb :lol:
 
Anyone know if they'll fit a non ///M I know it doesn't have fangs but I do sometimes scrape the underside of the bumper so would be nice to have
 
Sorry guys, I did write a reply to everyone but it's disappeared. I'm blaming the iPhone.

Ok, so I have reserved a set for

Bing,
alfascozzesi,
mj2k,
Andy.c
Jimmybell
Gmanlaw
Srhutch
Bish
Jingle
Beng
Captainmorgan999
Gwatson
Fishydave
Hopz121
Arrsavage

No problem with money, I just wanted to gauge firm interest before I cut hundreds like the badges.

Here is a link beng with a picture of the plates.http://www.ca-int.co.uk/single_prod-cHJvZF9pZD0yMjY5JmNhdF9pZD0mY29tcF9pZD0xMTg=.html

If there is enough interest in the alpina plates I would be happy to do some but not had a template yet.

They look identical (thanks Jakblade) but without a set to compare against they may differ slightly.

I doubt these would fit pre-facelift standard bumper and had done a template which would run the length of the bumper. The problem is postage, as they would be so long and flimsy. Unless I cut the length into four sections? Being under the car, it wouldn't matter aesthetically but would just mean attaching four sections. (If that makes sense).

I will update when they're cut and ready.
 
jimmybell said:
I'd be keen for these actually, put me down :)

Can we get them powdercoated black?
Click to expand...

Powdercoat is possible, just trying to keep the cost down. Also as they wouldn't be visible I wasn't sure if it would be worthwhile.

They would be easily painted or could be left as is. They'll be made from stainless steel so won't rust.
 
dans6490 said:
Sorry guys, I did write a reply to everyone but it's disappeared. I'm blaming the iPhone.

Ok, so I have reserved a set for

Bing,
alfascozzesi,
mj2k,
Andy.c
Jimmybell
Cracker
and possible beng.

No problem with money, I just wanted to gauge firm interest before I cut hundreds like the badges.

Here is a link beng with a picture of the plates.http://www.ca-int.co.uk/single_prod-cHJvZF9pZD0yMjY5JmNhdF9pZD0mY29tcF9pZD0xMTg=.html

If there is enough interest in the alpina plates I would be happy to do some but not had a template yet.

They look identical (thanks Jakblade) but without a set to compare against they may differ slightly.

I doubt these would fit pre-facelift standard bumper and had done a template which would run the length of the bumper. The problem is postage, as they would be so long and flimsy. Unless I cut the length into four sections? Being under the car, it wouldn't matter aesthetically but would just mean attaching four sections. (If that makes sense).

I will update when they're cut and ready.
Click to expand...
 
The ones I have on mi e are a set that PVR bought... But never fitted ;)
 
You must log in or register to reply here.
Back
Top Bottom