LED H7 Upgrade Issue

R

Rizel23

Member
Bought these, good value it seems as now rebadged as Novsight.

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F264294882721

However they don’t fit the standard metal push brackets 😞

Does anyone have a link to what I need to fit? Thanks
 
These are what you need to fit those bulbs into the existing housings.
https://www.ebay.co.uk/itm/372230952265

The LEDs I fitted are much better than halogens but still slightly underwhelming. I will be going for HID low beam soon and putting the LEDs in the high beams.
I hope those ones work for you :thumbsup:
 
Jfgoldfish said:
These are what you need to fit those bulbs into the existing housings.
https://www.ebay.co.uk/itm/372230952265

The LEDs I fitted are much better than halogens but still slightly underwhelming. I will be going for HID low beam soon and putting the LEDs in the high beams.
I hope those ones work for you :thumbsup:
Click to expand...

Thanks bought similar but did not it? Have you used these exact ones? Thanks
 
Yes, I used those exact ones after recommendation from another member. They fitted just fine. I believe they should fit both pre and post facelift cars.
Did the ones you bought not fit at all? There are a number of (slightly) different variations. They are a bit fiddly to get them sitting properly at first.
 
Jfgoldfish said:
Yes, I used those exact ones after recommendation from another member. They fitted just fine. I believe they should fit both pre and post facelift cars.
Did the ones you bought not fit at all? There are a number of (slightly) different variations. They are a bit fiddly to get them sitting properly at first.
Click to expand...

Bought these;

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F123918567306

Did not fit at all, the lugs on side are flat and it needs a bend I think to slot in. Will purchase ones you have listed, thanks
 
They look quite similar to what I used. Probably would go in with some tweaking but that's not ideal.

The ones in the link should work for you 👍
 
Jfgoldfish said:
They look quite similar to what I used. Probably would go in with some tweaking but that's not ideal.

The ones in the link should work for you 👍
Click to expand...

Just arrived, needed to grind the sides down but all fitted, so much better;

934F62EB-B47C-412B-840C-4D4B0F7DF6AD.jpeg

Many thanks
 
You must log in or register to reply here.
Back
Top Bottom