Hi all
just fitted a cruise control on my 2.5i auto 2004 bought from Soper of Lincoln. Took around 15 minutes to complete. All we needed was a small hack saw and a sharp stanley knife, job done. Dremel was not needed for this job. Just remember cut the tab out short and shave off with the knife followed by a bit of light sanding to finish it off.
Thank you for all the threads on the forum, especially the diagrams and the Soper's reccommendation.
Good luck to all those about to do the same thing.
Cheers
Daren
just fitted a cruise control on my 2.5i auto 2004 bought from Soper of Lincoln. Took around 15 minutes to complete. All we needed was a small hack saw and a sharp stanley knife, job done. Dremel was not needed for this job. Just remember cut the tab out short and shave off with the knife followed by a bit of light sanding to finish it off.
Thank you for all the threads on the forum, especially the diagrams and the Soper's reccommendation.
Good luck to all those about to do the same thing.
Cheers
Daren