Hi all
Just gone through 100,000 miles and she's playing up
Car sat idle for two weeks or More then drove it and I would describe the acceleration as jumpy under heavy acceleration. Seemed to happen 3000rpm and above. Now warning lights though.
Car has maybe been driven 1 or 2 days per week over last couple of month, only 15 miles commute with same problem. Sat maybe two weeks without moving again, today drove it home with same symptoms. Popped sport button on see if it changed, accelerated and Christmas Tree Dash, all orange, EML, Engine Warning, Traction and ABS. Lost power although engineer continued running and I do not think went into limp mode. Could slowly accelerate. I pulled over, revs "pulsing" between 500 and 800 rpm. Turned off ignition and back and was ok again apart from the jumpy acceleration and just the Engine Management light remaining on.
Popped the Torque code reader in and getting P1637 Power Train, Throttle Valve Position Control, Control Deviation and P1417 Powertrain.
Taking it to someone with a more sophisticated code reader next week but in the mean time I would be grateful for any pointers towards what we should be looking for?
Thank you
Just gone through 100,000 miles and she's playing up
Car sat idle for two weeks or More then drove it and I would describe the acceleration as jumpy under heavy acceleration. Seemed to happen 3000rpm and above. Now warning lights though.Car has maybe been driven 1 or 2 days per week over last couple of month, only 15 miles commute with same problem. Sat maybe two weeks without moving again, today drove it home with same symptoms. Popped sport button on see if it changed, accelerated and Christmas Tree Dash, all orange, EML, Engine Warning, Traction and ABS. Lost power although engineer continued running and I do not think went into limp mode. Could slowly accelerate. I pulled over, revs "pulsing" between 500 and 800 rpm. Turned off ignition and back and was ok again apart from the jumpy acceleration and just the Engine Management light remaining on.
Popped the Torque code reader in and getting P1637 Power Train, Throttle Valve Position Control, Control Deviation and P1417 Powertrain.
Taking it to someone with a more sophisticated code reader next week but in the mean time I would be grateful for any pointers towards what we should be looking for?
Thank you
