Warsp77 said:Is there any way of visually checking to see if the car is the si version? I've seen one I'm interested in buying, and advert says it's the si, however looking at pics where it has the writing on side by indicator it says 3.0 i.
Of course - good point. If it's pre-2006 it won't be an Simr wilks said:Warsp77 said:Is there any way of visually checking to see if the car is the si version? I've seen one I'm interested in buying, and advert says it's the si, however looking at pics where it has the writing on side by indicator it says 3.0 i.
What year registration is it ?
Mr Tidy said:As has been said, Coupes are all Si's.
The change came with the facelift in 2006 I believe, but even facelifts have the 3.0i badge!
Can you find a dip-stick under the bonnet? - if not it is an Si with the N52 engine and 265bhp, but if you can it isn't an Si so has the M54 engine and 231 bhp!
Mr Tidy said:As has been said, Coupes are all Si's.
The change came with the facelift in 2006 I believe, but even facelifts have the 3.0i badge!
Can you find a dip-stick under the bonnet? - if not it is an Si with the N52 engine and 265bhp, but if you can it isn't an Si so has the M54 engine and 231 bhp!
enzed4 said:Difficult to tell as it may have been modded to add Si type features.
Check for m-sport seats, MFSW in black with the ///m logo, and the 135m wheels which I think were usually specced on the Si models.
Only way for sure is to put the VIN into a BMW vin decoder. If you're lucky it will also have the 'vin displayed on dash' option (or whatever its called), as mine does, which allows you to see the VIN from outside.
srhutch said:enzed4 said:Difficult to tell as it may have been modded to add Si type features.
Check for m-sport seats, MFSW in black with the ///m logo, and the 135m wheels which I think were usually specced on the Si models.
Only way for sure is to put the VIN into a BMW vin decoder. If you're lucky it will also have the 'vin displayed on dash' option (or whatever its called), as mine does, which allows you to see the VIN from outside.
You are confusing Si which is an engine designation to a trim level which would either be SE or Sport.
Smartbear said:srhutch said:enzed4 said:Difficult to tell as it may have been modded to add Si type features.
Check for m-sport seats, MFSW in black with the ///m logo, and the 135m wheels which I think were usually specced on the Si models.
Only way for sure is to put the VIN into a BMW vin decoder. If you're lucky it will also have the 'vin displayed on dash' option (or whatever its called), as mine does, which allows you to see the VIN from outside.
You are confusing Si which is an engine designation to a trim level which would either be SE or Sport.
Even that method is full of vagaries as my 3.0si was an se but had all the sport features mentioned above specced from new! :?
Rob
Warsp77 said:Is there any way of visually checking to see if the car is the si version? I've seen one I'm interested in buying, and advert says it's the si, however looking at pics where it has the writing on side by indicator it says 3.0 i.
Not really. OP asked how to tell the difference (and now that we know it's an '03, the question is moot), and I pointed out the most obvious, easy to check clues. I'd be surprised if there were a lot of 3.0i Z4's specced with all of the Sport options, unless they had been retrofitted after purchase. Happy to be educated on this though.srhutch said:enzed4 said:Difficult to tell as it may have been modded to add Si type features.
Check for m-sport seats, MFSW in black with the ///m logo, and the 135m wheels which I think were usually specced on the Si models.
Only way for sure is to put the VIN into a BMW vin decoder. If you're lucky it will also have the 'vin displayed on dash' option (or whatever its called), as mine does, which allows you to see the VIN from outside.
You are confusing Si which is an engine designation to a trim level which would either be SE or Sport.